Package: ahcpd
Version: 0.53-3
Depends: libc, ip, librt
License: MIT
Section: net
Architecture: arm_xscale
Installed-Size: 21434
Filename: ahcpd_0.53-3_arm_xscale.ipk
Size: 22314
SHA256sum: 0bfe5cc98d665c6f7634eb97971103e6da2e4f8c1bd929bd02a2e2674efc11a4
Description:  Ahcpd is a daemon for configuring an IPv6 network using the Ad-Hoc
 Configuration Protocol (AHCP).  AHCP is designed for wireless mesh
 networks, where IPv6 autoconfiguration and DHCPv6 do not work, but may
 also be used on wired networks.

Package: alfred
Version: 2019.2-3
Depends: libc, libnl-tiny1, librt
License: GPL-2.0
Section: net
Architecture: arm_xscale
Installed-Size: 25171
Filename: alfred_2019.2-3_arm_xscale.ipk
Size: 26275
SHA256sum: 70b363b6ecc769506a8163292e1a361da9742d0a3e6f8d35c540a537fef383c4
Description:  alfred is a user space daemon for distributing arbitrary local information over
 the mesh/network in a decentralized fashion. This data can be anything which
 appears to be useful - originally designed to replace the batman-adv
 visualization (vis), you may distribute hostnames, phone books, administration
 information, DNS information, the local weather forecast ...
 
 alfred runs as daemon in the background of the system. A user may insert
 information by using the alfred binary on the command line, or use special
 programs to communicate with alfred (done via unix sockets). alfred then takes
 care of distributing the local information to other alfred servers on other
 nodes. This is done via IPv6 link-local multicast, and does not require any
 configuration. A user can request data from alfred, and will receive the
 information available from all alfred servers in the network.

Package: babel-pinger
Version: 0.1-1
Depends: libc, librt
Section: net
Architecture: arm_xscale
Installed-Size: 3768
Filename: babel-pinger_0.1-1_arm_xscale.ipk
Size: 4564
SHA256sum: 2cb8497d3db44fe9e2c2ab9d90a0e6bbe3a960602890c5fc52d1a45600b1cf90
Description:  Babel-pinger is a hack to export a default route into Babel for people
 using DHCP to configure their routers rather than speaking to their
 upstream provider with a proper routing protocol.

Package: babeld
Version: 1.9.2-1
Depends: libc
License: MIT
Section: net
Architecture: arm_xscale
Installed-Size: 55133
Filename: babeld_1.9.2-1_arm_xscale.ipk
Size: 56251
SHA256sum: 850b6d75c6edb1427bd1edde881f77a0596f29195e0d774ad4944f3a111bda67
Description:  Babel is a loop-avoiding distance-vector routing protocol for IPv6 and IPv4
 with fast convergence properties. It is based on the ideas in DSDV, AODV and
 Cisco's EIGRP, but is designed to work well not only in wired networks but
 also in wireless mesh networks, and has been extended with support for
 overlay networks. Babel is in the process of becoming an IETF Standard.

Package: batctl-default
Version: 2019.2-8
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 200:/usr/sbin/batctl:/usr/libexec/batctl-default
License: GPL-2.0
Section: net
Architecture: arm_xscale
Installed-Size: 41617
Filename: batctl-default_2019.2-8_arm_xscale.ipk
Size: 42511
SHA256sum: a6c720735a546bccc131653dd91747d1e4a12f4ccccd4cfd862f8a549ca975f3
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2019.2 of the user space utility.
 Standard subcommands for configuration and online debugging are enabled.

Package: batctl-full
Version: 2019.2-8
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 300:/usr/sbin/batctl:/usr/libexec/batctl-full
License: GPL-2.0
Section: net
Architecture: arm_xscale
Installed-Size: 48825
Filename: batctl-full_2019.2-8_arm_xscale.ipk
Size: 49716
SHA256sum: 8d6388759b7819bea3dd4bf334b9a0bd27880cec1ec88385947bce66c88d2be3
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2019.2 of the user space utility.
 Subcommands for configuration, online and offline debugging are enabled.

Package: batctl-tiny
Version: 2019.2-8
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 100:/usr/sbin/batctl:/usr/libexec/batctl-tiny
License: GPL-2.0
Section: net
Architecture: arm_xscale
Installed-Size: 15124
Filename: batctl-tiny_2019.2-8_arm_xscale.ipk
Size: 16044
SHA256sum: b3f7e7e248c9c7933da1aa74239a4aa66833635664a7db7d7d79479d8c482956
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2019.2 of the user space utility.
 Only configuration relevant subcommands are enabled.

Package: batmand
Version: 1440-0
Depends: libc, libpthread, kmod-tun
License: GPL-2.0
Section: net
Architecture: arm_xscale
Installed-Size: 39091
Filename: batmand_1440-0_arm_xscale.ipk
Size: 39997
SHA256sum: b0e13a1ac5959400fa0fbb603ea6beddaef74ddeb1e9d81d0e041f1b4467d303
Description:  B.A.T.M.A.N. layer 3 routing daemon

Package: bird1-ipv4-uci
Version: 0.3-1
Depends: libc, bird1-ipv4, libuci20130104, uci
License: GPL-3.0+
Section: net
Architecture: arm_xscale
Installed-Size: 6740
Filename: bird1-ipv4-uci_0.3-1_arm_xscale.ipk
Size: 7748
SHA256sum: 14a092d9c77c292903b3d575702b5a6c09fbf36e5ba952c39ece35b2a880b2e5
Description:  bird1-ipv4 UCI integration module

Package: bird1-ipv4
Version: 1.6.6-1
Depends: libc, libpthread
Conflicts: bird4
License: GPL-2.0
Section: net
Architecture: arm_xscale
Installed-Size: 198429
Filename: bird1-ipv4_1.6.6-1_arm_xscale.ipk
Size: 199670
SHA256sum: 4e9b84e2ae61caad9899df8a308a8465f7e732a0b59407d663fda081fe36e01a
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6
 support into separate binaries. See also the bird2 package for the newer
 branch which integrates support for both IP protocols in a single binary.
 
 This is IPv4 version of BIRD, it supports OSPFv2, RIPv2 and BGP
 protocols.
 
 In BGP, BIRD supports communities, multiprotocol extensions, MD5
 authentication, 32bit AS numbers and could act as a route server or a
 route reflector. BIRD also supports multiple RIBs, multiple kernel
 routing tables and redistribution between the protocols with a powerful
 configuration syntax.
 

Package: bird1-ipv6-uci
Version: 0.3-1
Depends: libc, bird1-ipv6, libuci20130104, uci
License: GPL-3.0+
Section: net
Architecture: arm_xscale
Installed-Size: 5902
Filename: bird1-ipv6-uci_0.3-1_arm_xscale.ipk
Size: 6841
SHA256sum: 546ae83c747f6cc573e12e071fec1a3bc030516a6d92db4ca17bc42b4370d65e
Description:  bird1-ipv6 UCI integration module

Package: bird1-ipv6
Version: 1.6.6-1
Depends: libc, libpthread
Conflicts: bird6
License: GPL-2.0
Section: net
Architecture: arm_xscale
Installed-Size: 228221
Filename: bird1-ipv6_1.6.6-1_arm_xscale.ipk
Size: 229375
SHA256sum: d798e3cd44822b9ca9b00af27e4af0c76caa908ff542ad542700d5b0492398b0
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6
 support into separate binaries. See also the bird2 package for the newer
 branch which integrates support for both IP protocols in a single binary.
 
 This is IPv6 version of BIRD, it supports OSPFv3, RIPng and BGP
 protocols.
 
 In BGP, BIRD supports communities, multiprotocol extensions, MD5
 authentication, 32bit AS numbers and could act as a route server or a
 route reflector. BIRD also supports multiple RIBs, multiple kernel
 routing tables and redistribution between the protocols with a powerful
 configuration syntax.
 

Package: bird1c-ipv4
Version: 1.6.6-1
Depends: libc, libreadline8, libncurses6, bird1-ipv4
Conflicts: birdc4
License: GPL-2.0
Section: net
Architecture: arm_xscale
Installed-Size: 8631
Filename: bird1c-ipv4_1.6.6-1_arm_xscale.ipk
Size: 9846
SHA256sum: 6cd14c918517669ece30bffcc338c34299d7392383082788b5312e0a24914111
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6
 support into separate binaries. See also the bird2 package for the newer
 branch which integrates support for both IP protocols in a single binary.
 
 This is a BIRD command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 
 Unless you can't afford dependency on ncurses and readline, you
 should install BIRD command-line client together with BIRD.
 

Package: bird1c-ipv6
Version: 1.6.6-1
Depends: libc, libreadline8, libncurses6, bird1-ipv6
Conflicts: birdc6
License: GPL-2.0
Section: net
Architecture: arm_xscale
Installed-Size: 8704
Filename: bird1c-ipv6_1.6.6-1_arm_xscale.ipk
Size: 9917
SHA256sum: 30e074512177cbe588d0dedc0ace5b26bd21368a3f086c6adb53d6918da07482
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6
 support into separate binaries. See also the bird2 package for the newer
 branch which integrates support for both IP protocols in a single binary.
 
 This is a BIRD command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 
 Unless you can't afford dependency on ncurses and readline, you
 should install BIRD command-line client together with BIRD.
 

Package: bird1cl-ipv4
Version: 1.6.6-1
Depends: libc, bird1-ipv4
Conflicts: birdcl4
License: GPL-2.0
Section: net
Architecture: arm_xscale
Installed-Size: 7923
Filename: bird1cl-ipv4_1.6.6-1_arm_xscale.ipk
Size: 9077
SHA256sum: fe9cdc900a5f809e73cb9d4b9f7879684b17e14301a1d34d14f9966cbe871f1d
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6
 support into separate binaries. See also the bird2 package for the newer
 branch which integrates support for both IP protocols in a single binary.
 
 This is a BIRD lightweight command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 

Package: bird1cl-ipv6
Version: 1.6.6-1
Depends: libc, bird1-ipv6
Conflicts: birdcl6
License: GPL-2.0
Section: net
Architecture: arm_xscale
Installed-Size: 7993
Filename: bird1cl-ipv6_1.6.6-1_arm_xscale.ipk
Size: 9151
SHA256sum: 500c66e16bdf34400acc3d32c6de5b730fb0415294f0b6d3128bdf33b21c023a
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6
 support into separate binaries. See also the bird2 package for the newer
 branch which integrates support for both IP protocols in a single binary.
 
 This is a BIRD lightweight command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 

Package: bird2
Version: 2.0.10-1
Depends: libc, libpthread
Conflicts: bird1-ipv4, bird1-ipv6, bird4, bird6
License: GPL-2.0-or-later
Section: net
Architecture: arm_xscale
Installed-Size: 346207
Filename: bird2_2.0.10-1_arm_xscale.ipk
Size: 345983
SHA256sum: d02d941066f88f454b95846b8b89127cbaf00d02e8280f22adb73c899405c81d
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 BIRD supports OSPFv2, RIPv2, Babel and BGP protocols for IPv4 and
 OSPFv3, RIPng, Babel and BGP protocols for IPv6.
 
 In BGP, BIRD supports communities, multiprotocol extensions, MD5
 authentication, 32bit AS numbers and could act as a route server or a
 route reflector. BIRD also supports multiple RIBs, multiple kernel
 routing tables and redistribution between the protocols with a powerful
 configuration syntax.
 
 This is the 2.0 branch of Bird which integrates support for IPv4 and IPv6
 into a single branch, and also adds support for the Babel routing protocol.

Package: bird2c
Version: 2.0.10-1
Depends: libc, bird2, libreadline8, libncurses6
Conflicts: bird1c-ipv4, bird1c-ipv6, birdc4, birdc6
License: GPL-2.0-or-later
Section: net
Architecture: arm_xscale
Installed-Size: 8560
Filename: bird2c_2.0.10-1_arm_xscale.ipk
Size: 9677
SHA256sum: 38df0685248e97af8054ee456a173dc76673c372e98d456dcc053448f29d0292
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 
 Unless you can't afford dependency on ncurses and readline, you
 should install BIRD command-line client together with BIRD.

Package: bird2cl
Version: 2.0.10-1
Depends: libc, bird2
Conflicts: bird1cl-ipv4, bird1cl-ipv6, birdcl4, birdcl6
License: GPL-2.0-or-later
Section: net
Architecture: arm_xscale
Installed-Size: 7288
Filename: bird2cl_2.0.10-1_arm_xscale.ipk
Size: 8323
SHA256sum: cf1a58028509fdca71d39a040c698894df745ec095dc2287c82ba5efb15aaff9
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD lightweight command-line client. It is used to send commands
 to BIRD, commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.

Package: bmx6-json
Version: r2018020902-5
Depends: libc, bmx6, libjson-c5
License: GPL-2.0
Section: net
Architecture: arm_xscale
Installed-Size: 6449
Filename: bmx6-json_r2018020902-5_arm_xscale.ipk
Size: 7209
SHA256sum: 03e71c05c14f11a77ffa10d045199ad2b1574f09d0b31606b5f34cc083834a1f
Description:  json plugin based on json-c

Package: bmx6-sms
Version: r2018020902-5
Depends: libc, bmx6
License: GPL-2.0
Section: net
Architecture: arm_xscale
Installed-Size: 4861
Filename: bmx6-sms_r2018020902-5_arm_xscale.ipk
Size: 5579
SHA256sum: a230e4e359ad9eb93b6c6dd76b6200b54220f6edd7133156b8a205dfd1ebe6d6
Description:  sms plugin

Package: bmx6-table
Version: r2018020902-5
Depends: libc, bmx6
License: GPL-2.0
Section: net
Architecture: arm_xscale
Installed-Size: 8375
Filename: bmx6-table_r2018020902-5_arm_xscale.ipk
Size: 9143
SHA256sum: d631a50335933db51b710d67d856d727677c94f28e94932add9da96b63f212e3
Description:  bmx6 table plugin to automatic announce routing-table routes via ip6ip tunnels

Package: bmx6-uci-config
Version: r2018020902-5
Depends: libc, bmx6, libuci20130104
License: GPL-2.0
Section: net
Architecture: arm_xscale
Installed-Size: 8359
Filename: bmx6-uci-config_r2018020902-5_arm_xscale.ipk
Size: 9202
SHA256sum: 9b68d4a7b7db3c4e0b1bd6979c3ce0b4ec70dc8d871a1ad8a04599166a842c84
Description:  configuration plugin based on uci (recommended!)

Package: bmx6
Version: r2018020902-5
Depends: libc, kmod-ip6-tunnel, kmod-iptunnel6, kmod-tun
License: GPL-2.0
Section: net
Architecture: arm_xscale
Installed-Size: 141889
Filename: bmx6_r2018020902-5_arm_xscale.ipk
Size: 142678
SHA256sum: ca037358550519071552e5083663ac27f5d8a9e18c8f546f63cee72d77e52206
Description:  BMX6 layer 3 routing daemon supporting IPv4, IPv6, and IPv4 over IPv6

Package: bmx7-iwinfo
Version: r2019030802-1
Depends: libc, bmx7, libiwinfo20181126
License: GPL-2.0
Section: net
Architecture: arm_xscale
Installed-Size: 3988
Filename: bmx7-iwinfo_r2019030802-1_arm_xscale.ipk
Size: 4749
SHA256sum: d49409eb79035e0e090d87ecbc14b796f58ca287e2e2e8dcf3473a280f4610a5
Description:  link characteristics plugin based on libiwinfo (recommended!)

Package: bmx7-json
Version: r2019030802-1
Depends: libc, bmx7, libjson-c5
License: GPL-2.0
Section: net
Architecture: arm_xscale
Installed-Size: 7591
Filename: bmx7-json_r2019030802-1_arm_xscale.ipk
Size: 8385
SHA256sum: 70ae09b868ce8118f3203c47a2786c3be53e40e58b706cf065d126f83055a9a6
Description:  json plugin based on json-c

Package: bmx7-sms
Version: r2019030802-1
Depends: libc, bmx7
License: GPL-2.0
Section: net
Architecture: arm_xscale
Installed-Size: 5357
Filename: bmx7-sms_r2019030802-1_arm_xscale.ipk
Size: 6086
SHA256sum: fc2eb2b61fd41ac66e8cddfa4766314f9c205de38ff42fc69c7f2ac0392964ca
Description:  sms plugin

Package: bmx7-table
Version: r2019030802-1
Depends: libc, bmx7, bmx7-tun
License: GPL-2.0
Section: net
Architecture: arm_xscale
Installed-Size: 9399
Filename: bmx7-table_r2019030802-1_arm_xscale.ipk
Size: 10173
SHA256sum: 14a5c10dc532833eb348aff79790661e4613400845c66919ff4e2454f0352104
Description:  plugin to announce routes from tables via tunnels

Package: bmx7-topology
Version: r2019030802-1
Depends: libc, bmx7
License: GPL-2.0
Section: net
Architecture: arm_xscale
Installed-Size: 5102
Filename: bmx7-topology_r2019030802-1_arm_xscale.ipk
Size: 5824
SHA256sum: 89ba1973f274c726fe5e23717cb517bb3600bf090501aba78fd48552d705f66c
Description:  topology plugin

Package: bmx7-tun
Version: r2019030802-1
Depends: libc, bmx7, kmod-ip6-tunnel, kmod-iptunnel6, kmod-tun
License: GPL-2.0
Section: net
Architecture: arm_xscale
Installed-Size: 25697
Filename: bmx7-tun_r2019030802-1_arm_xscale.ipk
Size: 26447
SHA256sum: 6eff91781fc37feb9f7a75d500f31398d851281fe6aedfb3cf635277b6dcdd1e
Description:  ipip-based tunnel plugin (recommended!)

Package: bmx7-uci-config
Version: r2019030802-1
Depends: libc, bmx7, libuci20130104
License: GPL-2.0
Section: net
Architecture: arm_xscale
Installed-Size: 8064
Filename: bmx7-uci-config_r2019030802-1_arm_xscale.ipk
Size: 8871
SHA256sum: 5a1848cb6a60a9e4229f8e3becc07fe4eee5087c2d682b5c5e6a747be56c4a22
Description:  configuration plugin based on uci (recommended!)

Package: bmx7
Version: r2019030802-1
Depends: libc, zlib, libmbedtls12, libiwinfo20181126
License: GPL-2.0
Section: net
Architecture: arm_xscale
Installed-Size: 172238
Filename: bmx7_r2019030802-1_arm_xscale.ipk
Size: 172908
SHA256sum: 997b3e949b4733414522d8b0c40f479146c41c5dfe95ede287915f761bdc67d1
Description:  BMX7 routing daemon supporting securely-entrusted IPv6 (and IPv4in6) routing

Package: cjdns-tests
Version: 20.2-1
Depends: libc, libpthread, librt
License: GPL-3.0
Section: net
Architecture: arm_xscale
Installed-Size: 298130
Filename: cjdns-tests_20.2-1_arm_xscale.ipk
Size: 298271
SHA256sum: 985566091c505d5d72997bc9ab71e93407a4a3453946fefba2ba0e3866f27319
Description:  cjdns test cases

Package: cjdns
Version: 20.2-1
Depends: libc, kmod-tun, libnl-tiny1, libpthread, librt, libuci-lua, lua-bencode, dkjson, luasocket, lua-sha2
License: GPL-3.0
Section: net
Architecture: arm_xscale
Installed-Size: 379589
Filename: cjdns_20.2-1_arm_xscale.ipk
Size: 380265
SHA256sum: aaa8a6a6f5845ad282b835f3e0798c312bebe78541b12dcb76799f7f990f1de9
Description:  Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks.

Package: hnet-full-l2tp
Version: 2016-06-28-606d7e904603ad8792ac1a7ba825618df97b5a4e-2
Depends: libc, hnetd-nossl, luci-app-hnet, ip-full, kmod-l2tp-eth, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0
Section: net
Architecture: arm_xscale
Installed-Size: 551
Filename: hnet-full-l2tp_2016-06-28-606d7e904603ad8792ac1a7ba825618df97b5a4e-2_arm_xscale.ipk
Size: 1421
SHA256sum: 344c4142e5cf59702881b127bb3dff8e0586dd83fca853fc5c68d864de0b23e9
Description:  HNCP Homenet metapackage (w/ L2TP)

Package: hnet-full-secure
Version: 2016-06-28-606d7e904603ad8792ac1a7ba825618df97b5a4e-2
Depends: libc, hnetd-openssl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0
Section: net
Architecture: arm_xscale
Installed-Size: 105
Filename: hnet-full-secure_2016-06-28-606d7e904603ad8792ac1a7ba825618df97b5a4e-2_arm_xscale.ipk
Size: 958
SHA256sum: d93e8fd81bc09b81dd8356a7a931385749a640e207b934939cbdc1a0889a355a
Description:  HNCP Homenet metapackage (w/ SSL)

Package: hnet-full
Version: 2016-06-28-606d7e904603ad8792ac1a7ba825618df97b5a4e-2
Depends: libc, hnetd-nossl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0
Section: net
Architecture: arm_xscale
Installed-Size: 105
Filename: hnet-full_2016-06-28-606d7e904603ad8792ac1a7ba825618df97b5a4e-2_arm_xscale.ipk
Size: 940
SHA256sum: ef69728ca8fe0013f2fbad9ceb07a56add5b8ac7776ad5752b43f0157bbd61b0
Description:  HNCP Homenet metapackage

Package: hnetd-nossl
Version: 2016-06-28-606d7e904603ad8792ac1a7ba825618df97b5a4e-2
Depends: libc, odhcpd, odhcp6c, netifd
License: GPL-2.0
Section: net
Architecture: arm_xscale
Installed-Size: 94504
Filename: hnetd-nossl_2016-06-28-606d7e904603ad8792ac1a7ba825618df97b5a4e-2_arm_xscale.ipk
Size: 95512
SHA256sum: 9c7de72c0fd3bcb50382430966f34e981222ed963764db8c6d08876428b62bc7
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: hnetd-openssl
Version: 2016-06-28-606d7e904603ad8792ac1a7ba825618df97b5a4e-2
Depends: libc, odhcpd, odhcp6c, netifd, libopenssl1.1
License: GPL-2.0
Section: net
Architecture: arm_xscale
Installed-Size: 104436
Filename: hnetd-openssl_2016-06-28-606d7e904603ad8792ac1a7ba825618df97b5a4e-2_arm_xscale.ipk
Size: 105365
SHA256sum: a8e18b40af8119ca81b5fa7b85b59b3ff4f89e6b3c24564d45706444f067296e
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: luci-app-bird1-ipv4
Version: 0.3-1
Depends: libc, bird1-ipv4-uci, luci-base
License: GPL-3.0+
Section: luci
Architecture: arm_xscale
Installed-Size: 7429
Filename: luci-app-bird1-ipv4_0.3-1_arm_xscale.ipk
Size: 8238
SHA256sum: 0fdb4a8aa7f300f5f775ee5dae370b388e4b523919fc62fba720522d50d7ed4d
Description:  bird4 application for LuCI

Package: luci-app-bird1-ipv6
Version: 0.3-1
Depends: libc, bird1-ipv6-uci, luci-base
License: GPL-3.0+
Section: luci
Architecture: arm_xscale
Installed-Size: 7470
Filename: luci-app-bird1-ipv6_0.3-1_arm_xscale.ipk
Size: 8268
SHA256sum: 7605f7dedb1202b883978ba7d394eab1c6028cb7618aa939e88021d76395bb8a
Description:  bird6 application for LuCI

Package: luci-app-bmx6
Version: 6
Depends: libc, luci-lib-json, luci-base, luci-lib-httpclient, bmx6, luci-lib-jquery-1-4, luci-lib-dracula
License: GPL-2.0+
Section: luci
Architecture: arm_xscale
Installed-Size: 30308
Filename: luci-app-bmx6_6_arm_xscale.ipk
Size: 31136
SHA256sum: 507ce1ed38cf247b73b3929013b63b5f10355b24823305fe77bf16c90285fc5b
Description:  bmx6 web application (status and configuration) for LuCi web interface

Package: luci-app-bmx7
Version: 0.1-alpha
Depends: libc, luci-lib-json, luci-mod-admin-full, bmx7, bmx7-json
License: GPL-2.0+
Section: luci
Architecture: arm_xscale
Installed-Size: 21808
Filename: luci-app-bmx7_0.1-alpha_arm_xscale.ipk
Size: 22681
SHA256sum: c150acdeb9044b6ba3fad9033d476bd5693bc2dda63f4ed5d3ef61f2eec66596
Description:  LuCI application for web-based configuration and visualization of the BMX7 routing daemon

Package: luci-app-cjdns
Version: 1.3-6
Depends: libc, cjdns, luci-base
License: GPL-3.0
Section: luci
Architecture: arm_xscale
Installed-Size: 5376
Filename: luci-app-cjdns_1.3-6_arm_xscale.ipk
Size: 6328
SHA256sum: 802c7b554738fe16ccd8ab546fd72896e32d7ba5bca4fabead000dec46dd7651
Description:  This package allows you to configure and inspect cjdns networking using LuCI.
 
 Cjdns implements an encrypted IPv6 network using public-key cryptography
 for address allocation and a distributed hash table for routing.
 This provides near-zero-configuration networking, and prevents many
 of the security and scalability issues that plague existing networks.

Package: luci-app-hnet
Version: 2016-06-28-606d7e904603ad8792ac1a7ba825618df97b5a4e-2
Depends: libc
License: GPL-2.0
Section: luci
Architecture: arm_xscale
Installed-Size: 56787
Filename: luci-app-hnet_2016-06-28-606d7e904603ad8792ac1a7ba825618df97b5a4e-2_arm_xscale.ipk
Size: 57658
SHA256sum: d321e5e83c9f72ffd27afd3438b7197dadd6bdad95745d2738b77dbd65fad922
Description:  HNCP Homenet configuration and visualization

Package: luci-lib-dracula
Version: 6
Depends: libc
License: GPL-2.0+
Section: luci
Architecture: arm_xscale
Installed-Size: 23291
Filename: luci-lib-dracula_6_arm_xscale.ipk
Size: 24015
SHA256sum: faeb4cfc47a90b372984efda0d40c62546622f8a7e3086b24e5403ad8c0339e9
Description:  dracula graph javascript library

Package: luci-lib-jquery-1-4
Version: 6
Depends: libc
License: GPL-2.0+
Section: luci
Architecture: arm_xscale
Installed-Size: 24826
Filename: luci-lib-jquery-1-4_6_arm_xscale.ipk
Size: 25562
SHA256sum: a2b5565e8b721fa5811b7edd0307cdd3bc27971f27c2e0926e0447df57b4d8b9
Description:  minified javascript jQuery 1.4 library

Package: mcproxy
Version: 2017-08-24-93b5ace42268160ebbfff4c61818fb15fa2d9b99-2
Depends: libc, libpthread, libstdcpp6
License: GPL-2.0+
Section: net
Architecture: arm_xscale
Installed-Size: 113112
Filename: mcproxy_2017-08-24-93b5ace42268160ebbfff4c61818fb15fa2d9b99-2_arm_xscale.ipk
Size: 114125
SHA256sum: bcb14ff557875fd95c1b29c3a49755352a9373fd55a2b491adda99b47d5aa700
Description:  mcproxy is a free & open source implementation of the IGMP/MLD proxy function (see  RFC 4605) for Linux systems.
 It operates on the kernel tables for multicast routing and allows for multiple instantiations,
 as well as dynamically changing downstream interfaces.

Package: minimalist-pcproxy
Version: 2015-01-12-2d6d1b0b0a3b79a9b4a9b0a7606a84600a967bcb-1
Depends: libc, libubox20191228
License: GPL-2.0
Section: net
Architecture: arm_xscale
Installed-Size: 6068
Filename: minimalist-pcproxy_2015-01-12-2d6d1b0b0a3b79a9b4a9b0a7606a84600a967bcb-1_arm_xscale.ipk
Size: 7116
SHA256sum: a42627243168ab9197f32280c760a0e5ddf799b048a4cc8dad95a39f2273132b
Description:  This package contains a daemon which can be used to forward
 PCP (Port Control Protocol - RFC6887) requests requests to PCP remote servers.
 
 In and of itself, it is not very useful, but combined with hnetd+miniupnpd
 it allows for control of NAT forwarding and firewall pinholes from multiple
 hops away.

Package: mrd6
Version: 2013-11-30-c805eb33255dbc0b6647d463c6c67d1c9d3105a0-2
Depends: libc, libstdcpp6
License: GPL-2.0+
Section: net
Architecture: arm_xscale
Installed-Size: 256393
Filename: mrd6_2013-11-30-c805eb33255dbc0b6647d463c6c67d1c9d3105a0-2_arm_xscale.ipk
Size: 257126
SHA256sum: 2bf8eed72b9b4f79120f621210a356c3eba13b25bb9a24b38d2a78973dddb1fa
Description:  Multicast is becoming a major component in next generation networks, used 
 in several scenarios, from video broadcasting to multimedia conferencing. 
 In order to be implemented, new technology needs supporting hardware and 
 software across a set of devices and systems. MRD6 is an implementation of 
 a modular IPv6 Multicast Routing Framework for the Linux operating system 
 and provides MLDv2 (as well as MLDv1), PIM-SM and MBGP support.

Package: ndppd
Version: 0.2.5-1
Depends: libc, libstdcpp6
License: GPL-3.0+
Section: net
Architecture: arm_xscale
Installed-Size: 28374
Filename: ndppd_0.2.5-1_arm_xscale.ipk
Size: 29358
SHA256sum: 407a0fd38bf11fd5d5ebc5f1f80e837ff726eec02978752c4e48375277b9070e
Description:  ndppd, or NDP Proxy Daemon, is a daemon that proxies NDP (Neighbor Discovery
 Protocol) messages between interfaces.  ndppd currently only supports Neighbor
 Solicitation Messages and Neighbor Advertisement Messages.
 
 The ndp_proxy provided by Linux doesn't support listing proxies, and only hosts
 are supported.  No subnets.  ndppd solves this by listening for Neighbor
 Solicitation messages on an interface, then query the internal interfaces for
 that target IP before finally sending a Neighbor Advertisement message.

Package: nodogsplash
Version: 4.0.3-1
Depends: libc, libpthread, iptables-mod-ipopt, libmicrohttpd-no-ssl
Conflicts: nodogsplash2
License: GPL-2.0+
Section: net
Architecture: arm_xscale
Installed-Size: 58959
Filename: nodogsplash_4.0.3-1_arm_xscale.ipk
Size: 60059
SHA256sum: a5048a5e1f1a5cec31f7d4b903cac65ccb2d87c6979ff22d78f26ee5449d7e12
Description:  Nodogsplash is a Captive Portal that offers a simple way to
 provide restricted access to the Internet by showing a splash
 page to the user before Internet access is granted.
 It also incorporates an API that allows the creation of
 sophisticated authentication applications.

Package: ohybridproxy
Version: 2016-06-28-8a28ae92c97099e771c9ede5641e3782ae809c27-1
Depends: libc, libubox20191228, mdnsd
License: GPL-2.0
Section: net
Architecture: arm_xscale
Installed-Size: 11452
Filename: ohybridproxy_2016-06-28-8a28ae92c97099e771c9ede5641e3782ae809c27-1_arm_xscale.ipk
Size: 12334
SHA256sum: c7d11f9a5d60e26bb58070bdd3a9450a4dc89992e4ffcdf16528a00a0a3d65d0
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.

Package: oonf-init-scripts
Version: 0.9.1-r3
Depends: libc
Section: net
Architecture: arm_xscale
Installed-Size: 1391
Filename: oonf-init-scripts_0.9.1-r3_arm_xscale.ipk
Size: 2144
SHA256sum: 255aef23b2184cd102857c897aee39de1aeffa58b2378470c7a5588ae44abe67
Description:  Common OONF startup scripts

Package: opennds
Version: 5.2.0-1
Depends: libc, libpthread, iptables-mod-ipopt, libmicrohttpd-no-ssl
Conflicts: nodogsplash, nodogsplash2
License: GPL-2.0+
Section: net
Architecture: arm_xscale
Installed-Size: 84762
Filename: opennds_5.2.0-1_arm_xscale.ipk
Size: 85689
SHA256sum: 50ce7954aa8776e88c17cc16874e15215150d9e73876a1977c06b0a969f5e0c7
Description:  openNDS is a Captive Portal that offers a simple way to
 provide restricted access to the Internet by showing a splash
 page to the user before Internet access is granted.
 It also incorporates an API that allows the creation of
 sophisticated authentication applications.

Package: pimbd
Version: 2018-06-19-dbf4e5913b06e3160f506df15e6a047a403a5f21-1
Depends: libc, netifd
License: Apache-2.0
Section: net
Architecture: arm_xscale
Installed-Size: 82194
Filename: pimbd_2018-06-19-dbf4e5913b06e3160f506df15e6a047a403a5f21-1_arm_xscale.ipk
Size: 83141
SHA256sum: b751abb5347e98462d8a6f077713c31b8127255604bca744f0e9c1a5fe3fd36f
Description:  This package provides a daemon which implements the Protocol Independent
 Multicast BIDIR routing protocol. Note that a routing protocol must be 
 installed and running in order for PIM to function.

Package: prince
Version: v0.4-1
Depends: libc, libjson-c5, libpthread
License: MIT
Section: net
Architecture: arm_xscale
Installed-Size: 27099
Filename: prince_v0.4-1_arm_xscale.ipk
Size: 28051
SHA256sum: b6dedc6be5ccc74883293929f86935623481e67df0ff734b8107e98a69a98c29
Description:  Prince is an open source implementation of the PopRouting Algorithm.
 It has been developed as a Google Summer of Code Project in collaboration with Freifunk and the University of Trento.
 
 Prince fetches topology data from a Link State routing daemon (OONF, OLSR, OSPF, etc),
 calculates the betweenness centrality using the topology and then computes the
 the timers' optimal values using these data. At the end of the computation the timers are pushed back to the routing daemon.
 Since v0.4 it supports both OONF and OLSRd.

Package: quagga-bgpd
Version: 1.1.1-1
Depends: libc, quagga, quagga-libzebra
License: GPL-2.0-or-later
Section: net
Architecture: arm_xscale
Installed-Size: 200638
Filename: quagga-bgpd_1.1.1-1_arm_xscale.ipk
Size: 200901
SHA256sum: ac9374fe7b8c5fa70d1314c14e37fb2d0d0423b6149e8dbb71f73b09711c7f78
Description:  BGPv4, BGPv4+, BGPv4- routing engine

Package: quagga-isisd
Version: 1.1.1-1
Depends: libc, quagga, quagga-libzebra
License: GPL-2.0-or-later
Section: net
Architecture: arm_xscale
Installed-Size: 92303
Filename: quagga-isisd_1.1.1-1_arm_xscale.ipk
Size: 93033
SHA256sum: df7f94b56b7a2c89c0753b9e78e2ebef14fc3b8f92482b9ea589b480949de048
Description:  IS-IS routing engine

Package: quagga-libospf
Version: 1.1.1-1
Depends: libc, quagga, quagga-libzebra
License: GPL-2.0-or-later
Section: net
Architecture: arm_xscale
Installed-Size: 193787
Filename: quagga-libospf_1.1.1-1_arm_xscale.ipk
Size: 193130
SHA256sum: c3ed4f5bc2ac17d3d6d89434cc05ac6fba35421465d5df369ca91f6dc31e8195
Description:  OSPF library

Package: quagga-libzebra
Version: 1.1.1-1
Depends: libc, quagga
License: GPL-2.0-or-later
Section: net
Architecture: arm_xscale
Installed-Size: 130401
Filename: quagga-libzebra_1.1.1-1_arm_xscale.ipk
Size: 129427
SHA256sum: 8f6905b111f653d7c9f98d969f55a0db266ce0a9a97406ffda1e71b951fa37ac
Description:  zebra library

Package: quagga-ospf6d
Version: 1.1.1-1
Depends: libc, quagga, quagga-libospf
License: GPL-2.0-or-later
Section: net
Architecture: arm_xscale
Installed-Size: 88848
Filename: quagga-ospf6d_1.1.1-1_arm_xscale.ipk
Size: 89623
SHA256sum: 12da0d58ccaad067da9778be1e44e1545e03c11f5b14fb353487f33bd5bdf42f
Description:  OSPFv3 routing engine

Package: quagga-ospfd
Version: 1.1.1-1
Depends: libc, quagga, quagga-libospf
License: GPL-2.0-or-later
Section: net
Architecture: arm_xscale
Installed-Size: 3594
Filename: quagga-ospfd_1.1.1-1_arm_xscale.ipk
Size: 4397
SHA256sum: 28dbcfe045e1df8921d1266f9b5ff60905a5b34ab11aab56f13d6379d3400de6
Description:  OSPFv2 routing engine

Package: quagga-ripd
Version: 1.1.1-1
Depends: libc, quagga, quagga-libzebra
License: GPL-2.0-or-later
Section: net
Architecture: arm_xscale
Installed-Size: 36384
Filename: quagga-ripd_1.1.1-1_arm_xscale.ipk
Size: 37153
SHA256sum: 3fd4a726f1c7ac4db64293bea25af78f811be82ef4e2180e9034af53540b0ebb
Description:  RIP routing engine

Package: quagga-ripngd
Version: 1.1.1-1
Depends: libc, quagga, quagga-libzebra
License: GPL-2.0-or-later
Section: net
Architecture: arm_xscale
Installed-Size: 29729
Filename: quagga-ripngd_1.1.1-1_arm_xscale.ipk
Size: 30473
SHA256sum: bb57648f4b79c8cc2d8a65a39fe3f2320f3bb27dae55ce162520ea7c6eb96952
Description:  RIPNG routing engine

Package: quagga-vtysh
Version: 1.1.1-1
Depends: libc, quagga, quagga-libzebra, libreadline8, libncurses6
License: GPL-2.0-or-later
Section: net
Architecture: arm_xscale
Installed-Size: 117625
Filename: quagga-vtysh_1.1.1-1_arm_xscale.ipk
Size: 117853
SHA256sum: dd33c4ecdfb7c83c9646e9441010557281eca3cb3fb64c5764e407acefb9de09
Description:  integrated shell for Quagga routing software

Package: quagga-watchquagga
Version: 1.1.1-1
Depends: libc, quagga, quagga-libzebra
License: GPL-2.0-or-later
Section: net
Architecture: arm_xscale
Installed-Size: 11403
Filename: quagga-watchquagga_1.1.1-1_arm_xscale.ipk
Size: 12207
SHA256sum: 362c6500d82a155549456c1021c5c1eea166590ea10bdeea43dc45aeb8afe9fe
Description:  Quagga watchdog

Package: quagga-zebra
Version: 1.1.1-1
Depends: libc, quagga, quagga-libzebra
License: GPL-2.0-or-later
Section: net
Architecture: arm_xscale
Installed-Size: 89306
Filename: quagga-zebra_1.1.1-1_arm_xscale.ipk
Size: 89845
SHA256sum: dd66ad66252ecb0030db7f652c57490455e6f7854c279b1c04d76b4a13ebdf7e
Description:  Zebra daemon

Package: quagga
Version: 1.1.1-1
Depends: libc, librt
License: GPL-2.0-or-later
Section: net
Architecture: arm_xscale
Installed-Size: 2389
Filename: quagga_1.1.1-1_arm_xscale.ipk
Size: 3236
SHA256sum: d0533e3e434abed6b02afe977a1541ce8bc0c7e399010424050e447cab5e1632
Description:  A routing software package that provides TCP/IP based routing services
 with routing protocols support such as RIPv1, RIPv2, RIPng, OSPFv2,
 OSPFv3, BGP-4, and BGP-4+

Package: vis
Version: 1440-0
Depends: libc, libpthread
License: GPL-2.0
Section: net
Architecture: arm_xscale
Installed-Size: 10038
Filename: vis_1440-0_arm_xscale.ipk
Size: 10857
SHA256sum: 0ede671573228d02aa71489b061c5a6603de62d9a023b7faf6e98d042c2d28b1
Description:  visualization server for B.A.T.M.A.N. layer 3

Package: zonestitcher
Version: 2016-06-28-8a28ae92c97099e771c9ede5641e3782ae809c27-1
Depends: libc, libubox20191228
License: GPL-2.0
Section: net
Architecture: arm_xscale
Installed-Size: 9480
Filename: zonestitcher_2016-06-28-8a28ae92c97099e771c9ede5641e3782ae809c27-1_arm_xscale.ipk
Size: 10309
SHA256sum: a8ba31b011380bfea48521416322351e5147d0c6399e5a36cad576be7ffd0a35
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.