Package: ahcpd Version: 0.53-r3 Depends: libc, ip, librt License: MIT Section: net URL: https://www.irif.fr/~jch/software/ahcp/ Architecture: aarch64_cortex-a76 Installed-Size: 81920 Filename: ahcpd_0.53-r3_aarch64_cortex-a76.ipk Size: 24161 SHA256sum: 3a748c66c38a1fa09b8e74c28e6765352079d0b572fee592ff97d2e3452f3346 Description: Ahcpd is a daemon for configuring an IPv6 network using the Ad-Hoc Configuration Protocol (AHCP). AHCP is designed for wireless mesh networks, where IPv6 autoconfiguration and DHCPv6 do not work, but may also be used on wired networks. Package: alfred Version: 2024.1-r1 Depends: libc, libnl-tiny1, librt License: GPL-2.0-only MIT Section: net URL: https://www.open-mesh.org/ Architecture: aarch64_cortex-a76 Installed-Size: 143360 Filename: alfred_2024.1-r1_aarch64_cortex-a76.ipk Size: 28910 SHA256sum: 0ae3dc745d090e3f0a4a3778ed0c190f36c6c6fd3ea1d04dbbad48d171fbf47f Description: alfred is a user space daemon for distributing arbitrary local information over the mesh/network in a decentralized fashion. This data can be anything which appears to be useful - originally designed to replace the batman-adv visualization (vis), you may distribute hostnames, phone books, administration information, DNS information, the local weather forecast ... alfred runs as daemon in the background of the system. A user may insert information by using the alfred binary on the command line, or use special programs to communicate with alfred (done via unix sockets). alfred then takes care of distributing the local information to other alfred servers on other nodes. This is done via IPv6 link-local multicast, and does not require any configuration. A user can request data from alfred, and will receive the information available from all alfred servers in the network. Package: babel-pinger Version: 0.1-r1 Depends: libc, librt Section: net URL: http://www.pps.univ-paris-diderot.fr/~jch/software/babel/ Architecture: aarch64_cortex-a76 Installed-Size: 71680 Filename: babel-pinger_0.1-r1_aarch64_cortex-a76.ipk Size: 4921 SHA256sum: 762de3ba1e876a8162ae24d0e0b9c40ab6ad1580cd22f7eaa6c7555041edf4b7 Description: Babel-pinger is a hack to export a default route into Babel for people using DHCP to configure their routers rather than speaking to their upstream provider with a proper routing protocol. Package: babeld Version: 1.13.1-r1 Depends: libc, libubus20231128, libubox20240329 License: MIT Section: net URL: https://www.irif.fr/~jch/software/babel/ Architecture: aarch64_cortex-a76 Installed-Size: 153600 Filename: babeld_1.13.1-r1_aarch64_cortex-a76.ipk Size: 69438 SHA256sum: 55cfb23167fda57a2e6707b04bee4f2560061c033294c86d570238da6b2aeb3a Description: Babel is a loop-avoiding distance-vector routing protocol for IPv6 and IPv4 with fast convergence properties. It is based on the ideas in DSDV, AODV and Cisco's EIGRP, but is designed to work well not only in wired networks but also in wireless mesh networks, and has been extended with support for overlay networks. Babel is an IETF standard protocol (RFC 8966). Package: batctl-default Version: 2024.1-r1 Depends: libc, libnl-tiny1, librt Provides: batctl Alternatives: 200:/usr/sbin/batctl:/usr/libexec/batctl-default License: GPL-2.0-only ISC MIT Section: net URL: https://www.open-mesh.org/ Architecture: aarch64_cortex-a76 Installed-Size: 143360 Filename: batctl-default_2024.1-r1_aarch64_cortex-a76.ipk Size: 47138 SHA256sum: fcba69cfe4f977f6192d7c1654fe81ccdc93ecd40dbc44a99d7eebf0953138da Description: batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced. It is an easier method for configuring batman-adv and provides some additional tools for debugging as well. This package builds version 2024.1 of the user space utility. Standard subcommands for configuration and online debugging are enabled. Package: batctl-full Version: 2024.1-r1 Depends: libc, libnl-tiny1, librt Provides: batctl Alternatives: 300:/usr/sbin/batctl:/usr/libexec/batctl-full License: GPL-2.0-only ISC MIT Section: net URL: https://www.open-mesh.org/ Architecture: aarch64_cortex-a76 Installed-Size: 143360 Filename: batctl-full_2024.1-r1_aarch64_cortex-a76.ipk Size: 54154 SHA256sum: 6dda394f0bb9e92eec4c3f18dbcd6be5c4f76e9a9ca45515dfbf19a37d2b254b Description: batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced. It is an easier method for configuring batman-adv and provides some additional tools for debugging as well. This package builds version 2024.1 of the user space utility. Subcommands for configuration, online and offline debugging are enabled. Package: batctl-tiny Version: 2024.1-r1 Depends: libc, libnl-tiny1, librt Provides: batctl Alternatives: 100:/usr/sbin/batctl:/usr/libexec/batctl-tiny License: GPL-2.0-only ISC MIT Section: net URL: https://www.open-mesh.org/ Architecture: aarch64_cortex-a76 Installed-Size: 71680 Filename: batctl-tiny_2024.1-r1_aarch64_cortex-a76.ipk Size: 16907 SHA256sum: e57e664fa8cc6558869bcba6482502069a26220ceb8ed06ecd4762f4e1f285ab Description: batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced. It is an easier method for configuring batman-adv and provides some additional tools for debugging as well. This package builds version 2024.1 of the user space utility. Only configuration relevant subcommands are enabled. Package: batmand Version: 1440-r1 Depends: libc, libpthread, kmod-tun License: GPL-2.0 Section: net URL: https://www.open-mesh.org/ Architecture: aarch64_cortex-a76 Installed-Size: 143360 Filename: batmand_1440-r1_aarch64_cortex-a76.ipk Size: 45879 SHA256sum: 15c43511aefe07ac417e6e7cb091f489d698c4702f315fdae6f211f0c13c7ee6 Description: B.A.T.M.A.N. layer 3 routing daemon Package: bird2 Version: 2.15.1-r1 Depends: libc, libpthread Conflicts: bird1-ipv4, bird1-ipv6, bird4, bird6 License: GPL-2.0-or-later Section: net URL: http://bird.network.cz/ Architecture: aarch64_cortex-a76 Installed-Size: 1075200 Filename: bird2_2.15.1-r1_aarch64_cortex-a76.ipk Size: 394046 SHA256sum: 284183e71534ccdc436c8df549fa15daaab227bfb72c27d162d0c76a6e59ab0b Description: BIRD is an internet routing daemon which manages TCP/IP routing tables with support of modern routing protocols, easy to use configuration interface and powerful route filtering language. It is lightweight and efficient and therefore appropriate for small embedded routers. BIRD supports OSPFv2, RIPv2, Babel and BGP protocols for IPv4 and OSPFv3, RIPng, Babel and BGP protocols for IPv6. In BGP, BIRD supports communities, multiprotocol extensions, MD5 authentication, 32bit AS numbers and could act as a route server or a route reflector. BIRD also supports multiple RIBs, multiple kernel routing tables and redistribution between the protocols with a powerful configuration syntax. This is the 2.0 branch of Bird which integrates support for IPv4 and IPv6 into a single branch, and also adds support for the Babel routing protocol. Package: bird2c Version: 2.15.1-r1 Depends: libc, bird2, libreadline8, libncurses6 Conflicts: bird1c-ipv4, bird1c-ipv6, birdc4, birdc6 License: GPL-2.0-or-later Section: net URL: http://bird.network.cz/ Architecture: aarch64_cortex-a76 Installed-Size: 81920 Filename: bird2c_2.15.1-r1_aarch64_cortex-a76.ipk Size: 11118 SHA256sum: dec773f02a2051997f492fcdd529b78bf530a25daba46324ca051fdf2a9bf907 Description: BIRD is an internet routing daemon which manages TCP/IP routing tables with support of modern routing protocols, easy to use configuration interface and powerful route filtering language. It is lightweight and efficient and therefore appropriate for small embedded routers. This is a BIRD command-line client. It is used to send commands to BIRD, commands can perform simple actions such as enabling/disabling of protocols, telling BIRD to show various information, telling it to show a routing table filtered by a filter, or asking BIRD to reconfigure. Unless you can't afford dependency on ncurses and readline, you should install BIRD command-line client together with BIRD. Package: bird2cl Version: 2.15.1-r1 Depends: libc, bird2 Conflicts: bird1cl-ipv4, bird1cl-ipv6, birdcl4, birdcl6 License: GPL-2.0-or-later Section: net URL: http://bird.network.cz/ Architecture: aarch64_cortex-a76 Installed-Size: 81920 Filename: bird2cl_2.15.1-r1_aarch64_cortex-a76.ipk Size: 9639 SHA256sum: 8467782caa260a62a32eaf398e8991601410749b781fdb55b904e0a9987230a7 Description: BIRD is an internet routing daemon which manages TCP/IP routing tables with support of modern routing protocols, easy to use configuration interface and powerful route filtering language. It is lightweight and efficient and therefore appropriate for small embedded routers. This is a BIRD lightweight command-line client. It is used to send commands to BIRD, commands can perform simple actions such as enabling/disabling of protocols, telling BIRD to show various information, telling it to show a routing table filtered by a filter, or asking BIRD to reconfigure. Package: bmx7-iwinfo Version: r2024051906-r1 Depends: libc, bmx7, libiwinfo20230701 License: GPL-2.0-or-later Section: net URL: https://github.com/bmx-routing/bmx7 Architecture: aarch64_cortex-a76 Installed-Size: 71680 Filename: bmx7-iwinfo_r2024051906-r1_aarch64_cortex-a76.ipk Size: 4999 SHA256sum: a04b218b5ac7669ae7cd6faa2850aabde7655fd3a0f863c7b759348228deb0fc Description: link characteristics plugin via libiwinfo (recommended!) Package: bmx7-json Version: r2024051906-r1 Depends: libc, bmx7, libjson-c5 License: GPL-2.0-or-later Section: net URL: https://github.com/bmx-routing/bmx7 Architecture: aarch64_cortex-a76 Installed-Size: 71680 Filename: bmx7-json_r2024051906-r1_aarch64_cortex-a76.ipk Size: 8908 SHA256sum: 999ae5e56767fe6c1de0ae3ec22ca8d66a95e8c35e7bcdfc3ed0d7ff4f2763a8 Description: json plugin based on json-c Package: bmx7-sms Version: r2024051906-r1 Depends: libc, bmx7 License: GPL-2.0-or-later Section: net URL: https://github.com/bmx-routing/bmx7 Architecture: aarch64_cortex-a76 Installed-Size: 71680 Filename: bmx7-sms_r2024051906-r1_aarch64_cortex-a76.ipk Size: 6537 SHA256sum: f26b5a1a66c5710282e8666bce796eb075114e25b2a539e0b87d4ad8ebf088ee Description: sms plugin Package: bmx7-table Version: r2024051906-r1 Depends: libc, bmx7, bmx7-tun License: GPL-2.0-or-later Section: net URL: https://github.com/bmx-routing/bmx7 Architecture: aarch64_cortex-a76 Installed-Size: 71680 Filename: bmx7-table_r2024051906-r1_aarch64_cortex-a76.ipk Size: 11023 SHA256sum: 37124ec592dcfb408db47a42bf55a20148959100ada7aa824153286f481a10f3 Description: plugin to announce routes from tables via tunnels Package: bmx7-topology Version: r2024051906-r1 Depends: libc, bmx7 License: GPL-2.0-or-later Section: net URL: https://github.com/bmx-routing/bmx7 Architecture: aarch64_cortex-a76 Installed-Size: 71680 Filename: bmx7-topology_r2024051906-r1_aarch64_cortex-a76.ipk Size: 5941 SHA256sum: f1e816f0328330d2762f610cf887b35da419658bb832693812ab738d231031c8 Description: topology plugin Package: bmx7-tun Version: r2024051906-r1 Depends: libc, bmx7, kmod-ip6-tunnel, kmod-iptunnel6, kmod-tun License: GPL-2.0-or-later Section: net URL: https://github.com/bmx-routing/bmx7 Architecture: aarch64_cortex-a76 Installed-Size: 81920 Filename: bmx7-tun_r2024051906-r1_aarch64_cortex-a76.ipk Size: 27569 SHA256sum: 828943f1ea13b5e2926aa0bf719b4c096fa907385bc92a4b296aea09e1d890c9 Description: ipip-based tunnel plugin (recommended!) Package: bmx7-uci-config Version: r2024051906-r1 Depends: libc, bmx7, libuci20130104 License: GPL-2.0-or-later Section: net URL: https://github.com/bmx-routing/bmx7 Architecture: aarch64_cortex-a76 Installed-Size: 81920 Filename: bmx7-uci-config_r2024051906-r1_aarch64_cortex-a76.ipk Size: 9609 SHA256sum: 4087c958b19a77e99c514ae744a6eb2f4d3246c37055ce5e86c6a99f7a6c6ca5 Description: configuration plugin based on uci (recommended!) Package: bmx7 Version: r2024051906-r1 Depends: libc, zlib, libmbedtls21, libiwinfo20230701 License: GPL-2.0-or-later Section: net URL: https://github.com/bmx-routing/bmx7 Architecture: aarch64_cortex-a76 Installed-Size: 430080 Filename: bmx7_r2024051906-r1_aarch64_cortex-a76.ipk Size: 178586 SHA256sum: 4a55f9d5586ad3cb8b0dadf7c1b9e7e0858a636497a0d7e2043b6d710b186c49 Description: BMX7 routing daemon supporting securely-entrusted IPv6 (and IPv4in6) routing Package: cjdns-tests Version: 21.1-r6 Depends: libc, libpthread, librt License: GPL-3.0-or-later Section: net URL: https://github.com/cjdelisle/cjdns Architecture: aarch64_cortex-a76 Installed-Size: 768000 Filename: cjdns-tests_21.1-r6_aarch64_cortex-a76.ipk Size: 340314 SHA256sum: 4888a82609e86a0fe1a401510c8b0411ecfea288c32f66193cd69b66215b318e Description: cjdns test cases Package: cjdns Version: 21.1-r6 Depends: libc, kmod-tun, libnl-tiny1, libpthread, librt, libuci-lua, lua-bencode, dkjson, luasocket, lua-sha2 License: GPL-3.0-or-later Section: net URL: https://github.com/cjdelisle/cjdns Architecture: aarch64_cortex-a76 Installed-Size: 993280 Filename: cjdns_21.1-r6_aarch64_cortex-a76.ipk Size: 401476 SHA256sum: d4fed5750ea6dbb78b178368132739b8216a5ba5615668ea10ca7a3114603eb2 Description: Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks. Package: hnet-full-l2tp Version: 2018.12.21~c4376661-r1 Depends: libc, hnetd-nossl, luci-app-hnet, ip-full, kmod-l2tp-eth, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy License: GPL-2.0-only Section: net URL: https://github.com/sbyx/hnetd Architecture: aarch64_cortex-a76 Installed-Size: 10240 Filename: hnet-full-l2tp_2018.12.21~c4376661-r1_aarch64_cortex-a76.ipk Size: 1426 SHA256sum: 497acd1d28e2aadab1765fb924eab47dc8706e5b59d70ea9157c0a82f45b8bc2 Description: HNCP Homenet metapackage (w/ L2TP) Package: hnet-full-secure Version: 2018.12.21~c4376661-r1 Depends: libc, hnetd-openssl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy License: GPL-2.0-only Section: net URL: https://github.com/sbyx/hnetd Architecture: aarch64_cortex-a76 Installed-Size: 10240 Filename: hnet-full-secure_2018.12.21~c4376661-r1_aarch64_cortex-a76.ipk Size: 955 SHA256sum: 13969426abb7cf27719d2b34d2b3412eb4e384ae22c2c435e211bdb9af07ca1e Description: HNCP Homenet metapackage (w/ SSL) Package: hnet-full Version: 2018.12.21~c4376661-r1 Depends: libc, hnetd-nossl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy License: GPL-2.0-only Section: net URL: https://github.com/sbyx/hnetd Architecture: aarch64_cortex-a76 Installed-Size: 10240 Filename: hnet-full_2018.12.21~c4376661-r1_aarch64_cortex-a76.ipk Size: 947 SHA256sum: 509a150e84708d69916effb082f1c5c08a505dd22ad62fa3ffdba22123310dcc Description: HNCP Homenet metapackage Package: hnetd-nossl Version: 2018.12.21~c4376661-r1 Depends: libc, odhcpd, odhcp6c, netifd License: GPL-2.0-only Section: net URL: https://github.com/sbyx/hnetd Architecture: aarch64_cortex-a76 Installed-Size: 296960 Filename: hnetd-nossl_2018.12.21~c4376661-r1_aarch64_cortex-a76.ipk Size: 103582 SHA256sum: ab1426b07a52573640c383d47690877644ba696164cc98d024d4f369a4ea894a Description: This package provides a daemon which implementats distributed prefix assignment and service discovery for a home network consisting of multiple routers connected to multiple service providers. It provides a netifd protocol "hnet" for use in /etc/config/network. Package: hnetd-openssl Version: 2018.12.21~c4376661-r1 Depends: libc, odhcpd, odhcp6c, netifd, libopenssl3 License: GPL-2.0-only Section: net URL: https://github.com/sbyx/hnetd Architecture: aarch64_cortex-a76 Installed-Size: 296960 Filename: hnetd-openssl_2018.12.21~c4376661-r1_aarch64_cortex-a76.ipk Size: 114439 SHA256sum: f09bdaa55b19385f62308eae7123ec54e106199ff09f0b15ee85ad8258970454 Description: This package provides a daemon which implementats distributed prefix assignment and service discovery for a home network consisting of multiple routers connected to multiple service providers. It provides a netifd protocol "hnet" for use in /etc/config/network. Package: luci-app-cjdns Version: 1.3-r9 Depends: libc, cjdns, luci-compat, luci-base License: GPL-3.0-or-later Section: luci URL: https://github.com/cjdelisle/cjdns Architecture: aarch64_cortex-a76 Installed-Size: 40960 Filename: luci-app-cjdns_1.3-r9_aarch64_cortex-a76.ipk Size: 6593 SHA256sum: 7089676e6e86e776589a585aa469b66f0f6d3c3d43215ad3e216931480b6c36e Description: Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks. Package: luci-app-hnet Version: 2018.12.21~c4376661-r1 Depends: libc License: GPL-2.0-only Section: luci Architecture: aarch64_cortex-a76 Installed-Size: 235520 Filename: luci-app-hnet_2018.12.21~c4376661-r1_aarch64_cortex-a76.ipk Size: 57618 SHA256sum: fe8fd2224d5412da01767bee7a6eeae40145773e39ab1456016ebad4ad5b5be8 Description: HNCP Homenet configuration and visualization Package: luci-app-olsrd2 Version: 0.2.6-r16 Depends: oonf-olsrd2, luci-mod-admin-full, libc Section: luci Architecture: all Installed-Size: 61440 Filename: luci-app-olsrd2_0.2.6-r16_all.ipk Size: 7782 SHA256sum: eec3f8cb8d87ec7efbb158abca04090eb109d30732ffe9a92031c45bbca9089d Description: OLSR2 configuration and status module Package: mcproxy Version: 2017.08.24~93b5ace4-r9 Depends: libc, libpthread, libstdcpp6 License: GPL-2.0-or-later Section: net URL: https://mcproxy.realmv6.org Architecture: aarch64_cortex-a76 Installed-Size: 419840 Filename: mcproxy_2017.08.24~93b5ace4-r9_aarch64_cortex-a76.ipk Size: 129353 SHA256sum: 434ca1b4e962e1dabebf9b090060302726429925d9e06a922649588a146e31c0 Description: mcproxy is a free & open source implementation of the IGMP/MLD proxy function (see RFC 4605) for Linux systems. It operates on the kernel tables for multicast routing and allows for multiple instantiations, as well as dynamically changing downstream interfaces. Package: mesh11sd Version: 3.1.1-r1 Depends: libc License: GPL-2.0-or-later Section: net URL: https://github.com/opennds/mesh11sd Architecture: all Installed-Size: 92160 Filename: mesh11sd_3.1.1-r1_all.ipk Size: 19073 SHA256sum: fe28941a7a4ccc33938ce420f23cd2b4ef7fe61f4f509337737179fbf28c4663 Description: Mesh11sd is a dynamic parameter configuration daemon for 802.11s mesh networks. It was originally designed to leverage 802.11s mesh networking at Captive Portal venues. This is the open source version and it enables easy and automated mesh network operation with multiple mesh nodes. It allows all mesh parameters supported by the wireless driver to be set in the uci config file. Settings take effect immediately without having to restart the wireless network. Default settings give rapid and reliable layer 2 mesh convergence. Without mesh11sd, many mesh parameters cannot be set in the uci wireless config file as the mesh interface must be up before the parameters can be set. Some of those that are supported, would fail to be implemented when the network is (re)started resulting in errors or dropped nodes. The mesh11sd daemon dynamically checks configured parameters and sets them as required. Upstream wan connectivity is checked (eg Internet feed) and when not present, layer 2 peer mode is autonomously enabled, and when it is present, layer 3 portal mode is enabled. This allows the same simple router configuration to be used on all meshnodes in the layer 2 mesh. Remote terminal sessions and remote file transfers are supported using the meshnode mac address as an identifier. This version does not require a Captive Portal to be running. Package: minimalist-pcproxy Version: 2014.12.12~2d6d1b0b-r7 Depends: libc, libubox20240329 License: BSD-3-Clause Section: net URL: https://github.com/fingon/minimalist-pcproxy Architecture: aarch64_cortex-a76 Installed-Size: 71680 Filename: minimalist-pcproxy_2014.12.12~2d6d1b0b-r7_aarch64_cortex-a76.ipk Size: 7903 SHA256sum: 1152234d086915218b87bd6e43f7859e00a8cfe0197e58ed5797301c2790a61c Description: This package contains a daemon which can be used to forward PCP (Port Control Protocol - RFC6887) requests requests to PCP remote servers. In and of itself, it is not very useful, but combined with hnetd+miniupnpd it allows for control of NAT forwarding and firewall pinholes from multiple hops away. Package: naywatch Version: 1-r7 Depends: libc, owipcalc License: GPL-2.0-only Section: utils Architecture: all Installed-Size: 20480 Filename: naywatch_1-r7_all.ipk Size: 2851 SHA256sum: 14de223c05b3b857845a1dbda4b63aa4f2a444c6aa17d813d4752b90696037a0 Description: Reboots or triggers watchdog if no link-local neighbor is available. Important: Be careful when you do a sysupgrade. Stop naywatch first, and make sure procd took control again of the watchdog. You can do this using 'ubus call system watchdog'. Status should be "running". Package: ndppd Version: 0.2.5-r2 Depends: libc, libstdcpp6 License: GPL-3.0-or-later Section: net URL: http://www.priv.nu/projects/ndppd/ Architecture: aarch64_cortex-a76 Installed-Size: 143360 Filename: ndppd_0.2.5-r2_aarch64_cortex-a76.ipk Size: 34062 SHA256sum: bdd761a74178283a912b4756693a4c45be57a59af19479911d2d1365168b01c8 Description: ndppd, or NDP Proxy Daemon, is a daemon that proxies NDP (Neighbor Discovery Protocol) messages between interfaces. ndppd currently only supports Neighbor Solicitation Messages and Neighbor Advertisement Messages. The ndp_proxy provided by Linux doesn't support listing proxies, and only hosts are supported. No subnets. ndppd solves this by listening for Neighbor Solicitation messages on an interface, then query the internal interfaces for that target IP before finally sending a Neighbor Advertisement message. Package: nodogsplash Version: 5.0.2-r1 Depends: libc, libpthread, libmicrohttpd-no-ssl, iptables-nft, iptables-mod-nat-extra, iptables-mod-ipopt, iptables-mod-conntrack-extra License: GPL-2.0-or-later Section: net URL: https://github.com/nodogsplash/nodogsplash Architecture: aarch64_cortex-a76 Installed-Size: 235520 Filename: nodogsplash_5.0.2-r1_aarch64_cortex-a76.ipk Size: 50716 SHA256sum: 99c9fafbbc58e383dc88fb43dd97c180c0f6a27594f2aff52a2c433f1ca199f6 Description: Nodogsplash is a Captive Portal that offers a simple way to provide restricted access to the Internet by showing a splash page to the user before Internet access is granted. Package: ohybridproxy Version: 2020.05.22~0dfef1eb-r3 Depends: libc, libubox20240329, mdnsd License: GPL-2.0-only Section: net URL: https://github.com/sbyx/ohybridproxy Architecture: aarch64_cortex-a76 Installed-Size: 81920 Filename: ohybridproxy_2020.05.22~0dfef1eb-r3_aarch64_cortex-a76.ipk Size: 12430 SHA256sum: aeb6c7ebbff538ec09c9e73869d28301b1f85da5117d4b46f5593ac76f10db21 Description: This package provides a statically configured daemon for translating DNS requests to Multicast DNS and back again. Package: olsrd-mod-arprefresh Version: 2023.06.12~a9b3f1ac-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: aarch64_cortex-a76 Installed-Size: 71680 Filename: olsrd-mod-arprefresh_2023.06.12~a9b3f1ac-r1_aarch64_cortex-a76.ipk Size: 2920 SHA256sum: d36c9269c143892a6a5a5eef953ac992ed0bd87fff95b20264f276e94cc5c7cb Description: Kernel ARP cache refresh plugin Package: olsrd-mod-bmf Version: 2023.06.12~a9b3f1ac-r1 Depends: libc, olsrd, kmod-tun License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: aarch64_cortex-a76 Installed-Size: 71680 Filename: olsrd-mod-bmf_2023.06.12~a9b3f1ac-r1_aarch64_cortex-a76.ipk Size: 14242 SHA256sum: 240a72d1fa719e25b7d73132042b1af1066c473cb61308d1f7f39c20fdf7ae87 Description: Basic multicast forwarding plugin Package: olsrd-mod-dot-draw Version: 2023.06.12~a9b3f1ac-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: aarch64_cortex-a76 Installed-Size: 71680 Filename: olsrd-mod-dot-draw_2023.06.12~a9b3f1ac-r1_aarch64_cortex-a76.ipk Size: 4852 SHA256sum: 2d501a4c1be55b5ebee277a0c6f70bc4550f414f3dae283d826b40314ff1d98d Description: Dot topology information plugin Package: olsrd-mod-dyn-gw-plain Version: 2023.06.12~a9b3f1ac-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: aarch64_cortex-a76 Installed-Size: 71680 Filename: olsrd-mod-dyn-gw-plain_2023.06.12~a9b3f1ac-r1_aarch64_cortex-a76.ipk Size: 3413 SHA256sum: 4815503b8059017ee3331838828547fb2c32c77b1f34129caa6a07a7e8fb674b Description: Dynamic internet gateway plain plugin Package: olsrd-mod-dyn-gw Version: 2023.06.12~a9b3f1ac-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: aarch64_cortex-a76 Installed-Size: 71680 Filename: olsrd-mod-dyn-gw_2023.06.12~a9b3f1ac-r1_aarch64_cortex-a76.ipk Size: 5290 SHA256sum: ba1d2af4a404d1ffd82bf229f2fba74e123ce526b1c9c02750f73266ecee836b Description: Dynamic internet gateway plugin Package: olsrd-mod-filtergw Version: 2023.06.12~a9b3f1ac-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: aarch64_cortex-a76 Installed-Size: 71680 Filename: olsrd-mod-filtergw_2023.06.12~a9b3f1ac-r1_aarch64_cortex-a76.ipk Size: 3624 SHA256sum: 90367e23167bd76d551e78dd532abf48f3a76eef8456c0e3cb6b335a5e2fc33e Description: Filter Gateway plugin Package: olsrd-mod-httpinfo Version: 2023.06.12~a9b3f1ac-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: aarch64_cortex-a76 Installed-Size: 143360 Filename: olsrd-mod-httpinfo_2023.06.12~a9b3f1ac-r1_aarch64_cortex-a76.ipk Size: 31743 SHA256sum: 9290955198018db31fd0f0c97633c75218467852d73ad352e487af0817d54494 Description: Small informative web server plugin Package: olsrd-mod-jsoninfo Version: 2023.06.12~a9b3f1ac-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: aarch64_cortex-a76 Installed-Size: 71680 Filename: olsrd-mod-jsoninfo_2023.06.12~a9b3f1ac-r1_aarch64_cortex-a76.ipk Size: 24148 SHA256sum: 4f19ef482ad5dd2694bb8e02683719ac76b9e81ee71c2d13fb1c60106f5e58f9 Description: Small informative plugin with JSON output Package: olsrd-mod-mdns Version: 2023.06.12~a9b3f1ac-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: aarch64_cortex-a76 Installed-Size: 71680 Filename: olsrd-mod-mdns_2023.06.12~a9b3f1ac-r1_aarch64_cortex-a76.ipk Size: 10928 SHA256sum: 85734925e561ce8e9f2664fde5d58d428aec6e86c6d773f65741cc4b172f8980 Description: MDNS/Zeroconf/Bonjour packet distribution Package: olsrd-mod-nameservice Version: 2023.06.12~a9b3f1ac-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: aarch64_cortex-a76 Installed-Size: 71680 Filename: olsrd-mod-nameservice_2023.06.12~a9b3f1ac-r1_aarch64_cortex-a76.ipk Size: 13238 SHA256sum: 2117524bc84c5b7e69e77f5d49248ffb137fe59eb3d1b1f0f70d0fa07a77d010 Description: Lightweight hostname resolver plugin Package: olsrd-mod-netjson Version: 2023.06.12~a9b3f1ac-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: aarch64_cortex-a76 Installed-Size: 71680 Filename: olsrd-mod-netjson_2023.06.12~a9b3f1ac-r1_aarch64_cortex-a76.ipk Size: 14958 SHA256sum: 0b549915b78b7b6fa927ab141370087838f4d3332ad9d263025bbb8ab34604b4 Description: netjson plugin with JSON output Package: olsrd-mod-p2pd Version: 2023.06.12~a9b3f1ac-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: aarch64_cortex-a76 Installed-Size: 71680 Filename: olsrd-mod-p2pd_2023.06.12~a9b3f1ac-r1_aarch64_cortex-a76.ipk Size: 10510 SHA256sum: 74a54a0d32e340716773783e489af30bb3dfe321adc237fd7c7cf7b5683152b7 Description: Peer to Peer Discovery plugin Package: olsrd-mod-pgraph Version: 2023.06.12~a9b3f1ac-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: aarch64_cortex-a76 Installed-Size: 71680 Filename: olsrd-mod-pgraph_2023.06.12~a9b3f1ac-r1_aarch64_cortex-a76.ipk Size: 3928 SHA256sum: 86bca73036cc401fb4894cb864cd9e9c649b3eddf722f4d5938db8a00394e159 Description: output network topology for pgraph Package: olsrd-mod-pud Version: 2023.06.12~a9b3f1ac-r1 Depends: libc, olsrd, libgps30 License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: aarch64_cortex-a76 Installed-Size: 337920 Filename: olsrd-mod-pud_2023.06.12~a9b3f1ac-r1_aarch64_cortex-a76.ipk Size: 63459 SHA256sum: 647ab56f39e64c8a01989d2f94465345ef3ea0b85fdb24fbb589c8110894d5aa Description: Position Update Distribution plugin Package: olsrd-mod-quagga Version: 2023.06.12~a9b3f1ac-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: aarch64_cortex-a76 Installed-Size: 71680 Filename: olsrd-mod-quagga_2023.06.12~a9b3f1ac-r1_aarch64_cortex-a76.ipk Size: 7756 SHA256sum: 7ade04b398cb3cd47f183bd0e350603591715f5353c7ffe384d38dd1fb2b1470 Description: Quagga plugin Package: olsrd-mod-secure Version: 2023.06.12~a9b3f1ac-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: aarch64_cortex-a76 Installed-Size: 71680 Filename: olsrd-mod-secure_2023.06.12~a9b3f1ac-r1_aarch64_cortex-a76.ipk Size: 11763 SHA256sum: 9ece56d158891bb3fdac9e6a7321046e5a37d58d891f39ff985861eee77c527e Description: Message signing plugin to secure routing domain Package: olsrd-mod-sgwdynspeed Version: 2023.06.12~a9b3f1ac-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: aarch64_cortex-a76 Installed-Size: 71680 Filename: olsrd-mod-sgwdynspeed_2023.06.12~a9b3f1ac-r1_aarch64_cortex-a76.ipk Size: 5725 SHA256sum: f4b4c632f18a0c4ab7710320e4b72530ea06feeaeacf099e57866191862745c1 Description: Smart Gateway dynamic speed plugin Package: olsrd-mod-txtinfo Version: 2023.06.12~a9b3f1ac-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: aarch64_cortex-a76 Installed-Size: 71680 Filename: olsrd-mod-txtinfo_2023.06.12~a9b3f1ac-r1_aarch64_cortex-a76.ipk Size: 16461 SHA256sum: 71deae841d8d2183c6b7913f021dc2d3b091b2e5307c3a4b4d6c61f676a01704 Description: Small informative web server plugin Package: olsrd-mod-watchdog Version: 2023.06.12~a9b3f1ac-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: aarch64_cortex-a76 Installed-Size: 71680 Filename: olsrd-mod-watchdog_2023.06.12~a9b3f1ac-r1_aarch64_cortex-a76.ipk Size: 2572 SHA256sum: 617e5a77aca8e870e4a433e8ba833a879d501a09a3c1c7c6a8306d3e09f7f5f4 Description: Watchdog plugin Package: olsrd-utils Version: 2023.06.12~a9b3f1ac-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: aarch64_cortex-a76 Installed-Size: 10240 Filename: olsrd-utils_2023.06.12~a9b3f1ac-r1_aarch64_cortex-a76.ipk Size: 1959 SHA256sum: b7b59736202aca076f9af9c6e2ddb820006faf4e84abc61d359011ea75135e5c Description: Utils for OLSRD Package: olsrd Version: 2023.06.12~a9b3f1ac-r1 Depends: libc, libpthread, libubus20231128, iptables, ip6tables License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: aarch64_cortex-a76 Installed-Size: 368640 Filename: olsrd_2023.06.12~a9b3f1ac-r1_aarch64_cortex-a76.ipk Size: 145886 SHA256sum: fb89580cc5b5a76f5a041caac6df627794599a526fb4ec21042719b73295da68 Description: OLSR (Optimized Link State Routing) daemon Package: oonf-dlep-proxy Version: 2022.08.25~fb15d54d Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts Section: net URL: http://www.olsr.org/ Architecture: aarch64_cortex-a76 Installed-Size: 440320 Filename: oonf-dlep-proxy_2022.08.25~fb15d54d_aarch64_cortex-a76.ipk Size: 182306 SHA256sum: bbde73fc76aa823bd9e87d6b720c93819273560305c89936d343681010422cf9 Description: Build DLEP Radio+Router Agent Package: oonf-dlep-radio Version: 2022.08.25~fb15d54d Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts Section: net URL: http://www.olsr.org/ Architecture: aarch64_cortex-a76 Installed-Size: 440320 Filename: oonf-dlep-radio_2022.08.25~fb15d54d_aarch64_cortex-a76.ipk Size: 177424 SHA256sum: 4cc42c9b4eed95312a2eeebdd3d87fcf403e7c382db6b9445d61e57b52be75b0 Description: Build DLEP Radio Agent Package: oonf-init-scripts Version: 0.9.1-r3 Depends: libc Section: net URL: http://www.olsr.org/ Architecture: aarch64_cortex-a76 Installed-Size: 10240 Filename: oonf-init-scripts_0.9.1-r3_aarch64_cortex-a76.ipk Size: 2301 SHA256sum: 5af69a7b2a3aa7abcb4c495538a57bf322ccfd2156e79eef31a8db7936983126 Description: Common OONF startup scripts Package: oonf-olsrd2 Version: 2022.08.25~1cec9b21 Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts Section: net URL: http://www.olsr.org/ Architecture: aarch64_cortex-a76 Installed-Size: 655360 Filename: oonf-olsrd2_2022.08.25~1cec9b21_aarch64_cortex-a76.ipk Size: 260609 SHA256sum: 3c8ede6ca8de4462e792ee695017cf320999687c047a6ded188ceddb0d6a6bb3 Description: Build Olsrd V2 Routing Agent Package: opennds Version: 10.2.0-r1 Depends: libc, libmicrohttpd-no-ssl Conflicts: nodogsplash License: GPL-2.0-or-later Section: net URL: https://github.com/opennds/opennds Architecture: aarch64_cortex-a76 Installed-Size: 624640 Filename: opennds_10.2.0-r1_aarch64_cortex-a76.ipk Size: 162399 SHA256sum: 3dfa0f168c1df868fc3d99fd0fe9a21ba70d234988b73633640162197c536684 Description: openNDS (open Network Demarcation Service) is a high performance, small footprint, Captive Portal. It provides a border control gateway between a public local area network and the Internet. It supports all scenarios ranging from small stand alone venues through to large mesh networks with multiple portal entry points. Both the client driven Captive Portal Detection method (CPD) and gateway driven Captive Portal Identification method (CPI - RFC 8910 and RFC 8908) are supported. This version uses nftables. Package: pimbd Version: 2018.06.19~dbf4e591-r4 Depends: libc, netifd License: Apache-2.0 Section: net URL: https://github.com/Oryon/pimbd.git Architecture: aarch64_cortex-a76 Installed-Size: 225280 Filename: pimbd_2018.06.19~dbf4e591-r4_aarch64_cortex-a76.ipk Size: 88795 SHA256sum: 7389938f74d08a025f7e5971db78ae6996a9820b8aab3bc7b8f3b2e55d6bd9d3 Description: This package provides a daemon which implements the Protocol Independent Multicast BIDIR routing protocol. Note that a routing protocol must be installed and running in order for PIM to function. Package: prince Version: 0.4-r3 Depends: libc, libjson-c5, libpthread License: MIT Section: net URL: https://github.com/AdvancedNetworkingSystems/prince Architecture: aarch64_cortex-a76 Installed-Size: 215040 Filename: prince_0.4-r3_aarch64_cortex-a76.ipk Size: 37751 SHA256sum: 7bd88040434eaf72d23142618e98afa0a9d4a6755aa0d9707b849deae50f6478 Description: Prince is an open source implementation of the PopRouting Algorithm. It has been developed as a Google Summer of Code Project in collaboration with Freifunk and the University of Trento. Prince fetches topology data from a Link State routing daemon (OONF, OLSR, OSPF, etc), calculates the betweenness centrality using the topology and then computes the the timers' optimal values using these data. At the end of the computation the timers are pushed back to the routing daemon. Since v0.4 it supports both OONF and OLSRd. Package: vis Version: 2013.04.07~7710cce4-r9 Depends: libc, libpthread License: GPL-2.0-only Section: net URL: https://www.open-mesh.org/ Architecture: aarch64_cortex-a76 Installed-Size: 81920 Filename: vis_2013.04.07~7710cce4-r9_aarch64_cortex-a76.ipk Size: 12031 SHA256sum: b4ef32d6b3356191436970cdbcedd67774cb9d034dc3c0c16a6956e611dda9de Description: visualization server for B.A.T.M.A.N. layer 3 Package: zonestitcher Version: 2020.05.22~0dfef1eb-r3 Depends: libc, libubox20240329 License: GPL-2.0-only Section: net URL: https://github.com/sbyx/ohybridproxy Architecture: aarch64_cortex-a76 Installed-Size: 71680 Filename: zonestitcher_2020.05.22~0dfef1eb-r3_aarch64_cortex-a76.ipk Size: 10125 SHA256sum: f71b8530c253cfcc838e9f385c89ceac8c1f802373bbe0bcf8c81e1607ae343f Description: This package provides a statically configured daemon for translating DNS requests to Multicast DNS and back again.