Package: ahcpd
Version: 0.53-r3
Depends: libc, ip, librt
License: MIT
Section: net
URL: https://www.irif.fr/~jch/software/ahcp/
Architecture: arm_cortex-a8_vfpv3
Installed-Size: 61440
Filename: ahcpd_0.53-r3_arm_cortex-a8_vfpv3.ipk
Size: 22715
SHA256sum: bc76eee4db36068d57a8cdc4b5dd4cd1e69aa4e63f6965059f2e2abe15a36590
Description:  Ahcpd is a daemon for configuring an IPv6 network using the Ad-Hoc
 Configuration Protocol (AHCP).  AHCP is designed for wireless mesh
 networks, where IPv6 autoconfiguration and DHCPv6 do not work, but may
 also be used on wired networks.

Package: alfred
Version: 2024.1-r1
Depends: libc, libnl-tiny1, librt
License: GPL-2.0-only MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: arm_cortex-a8_vfpv3
Installed-Size: 61440
Filename: alfred_2024.1-r1_arm_cortex-a8_vfpv3.ipk
Size: 25910
SHA256sum: 5b43fe9642a6f794d0fd9543d291d557fc28fe04849e620bac8fb9631032cf4f
Description:  alfred is a user space daemon for distributing arbitrary local information
 over the mesh/network in a decentralized fashion. This data can be anything
 which appears to be useful - originally designed to replace the batman-adv
 visualization (vis), you may distribute hostnames, phone books, administration
 information, DNS information, the local weather forecast ...
 
 alfred runs as daemon in the background of the system. A user may insert
 information by using the alfred binary on the command line, or use special
 programs to communicate with alfred (done via unix sockets). alfred then takes
 care of distributing the local information to other alfred servers on other
 nodes. This is done via IPv6 link-local multicast, and does not require any
 configuration. A user can request data from alfred, and will receive the
 information available from all alfred servers in the network.

Package: babel-pinger
Version: 0.1-r1
Depends: libc, librt
Section: net
URL: http://www.pps.univ-paris-diderot.fr/~jch/software/babel/
Architecture: arm_cortex-a8_vfpv3
Installed-Size: 20480
Filename: babel-pinger_0.1-r1_arm_cortex-a8_vfpv3.ipk
Size: 4620
SHA256sum: 494b26e4364a204b56500ebfc37ebdd5c89ae200a2dccef0e84172ea4defbf0d
Description:  Babel-pinger is a hack to export a default route into Babel for people
 using DHCP to configure their routers rather than speaking to their
 upstream provider with a proper routing protocol.

Package: babeld
Version: 1.13.1-r1
Depends: libc, libubus20231128, libubox20240329
License: MIT
Section: net
URL: https://www.irif.fr/~jch/software/babel/
Architecture: arm_cortex-a8_vfpv3
Installed-Size: 133120
Filename: babeld_1.13.1-r1_arm_cortex-a8_vfpv3.ipk
Size: 63029
SHA256sum: 496a73ae4f2a4eae0bd345d984287b235325714ebbbe30dc8d412a5624ff1c78
Description:  Babel is a loop-avoiding distance-vector routing protocol for IPv6 and IPv4
 with fast convergence properties. It is based on the ideas in DSDV, AODV and
 Cisco's EIGRP, but is designed to work well not only in wired networks but
 also in wireless mesh networks, and has been extended with support for
 overlay networks. Babel is an IETF standard protocol (RFC 8966).

Package: batctl-default
Version: 2024.1-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 200:/usr/sbin/batctl:/usr/libexec/batctl-default
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: arm_cortex-a8_vfpv3
Installed-Size: 102400
Filename: batctl-default_2024.1-r1_arm_cortex-a8_vfpv3.ipk
Size: 43137
SHA256sum: c4009e11394326eea3d1bb0c3ae0e96610ce023822726bc84eebf13e3765f32b
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.1 of the user space utility.
 Standard subcommands for configuration and online debugging are enabled.

Package: batctl-full
Version: 2024.1-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 300:/usr/sbin/batctl:/usr/libexec/batctl-full
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: arm_cortex-a8_vfpv3
Installed-Size: 112640
Filename: batctl-full_2024.1-r1_arm_cortex-a8_vfpv3.ipk
Size: 50341
SHA256sum: 0faf7787b6325d4ac0238cd0a4a1eedcd9c743636fce11215125db8de723d458
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.1 of the user space utility.
 Subcommands for configuration, online and offline debugging are enabled.

Package: batctl-tiny
Version: 2024.1-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 100:/usr/sbin/batctl:/usr/libexec/batctl-tiny
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: arm_cortex-a8_vfpv3
Installed-Size: 40960
Filename: batctl-tiny_2024.1-r1_arm_cortex-a8_vfpv3.ipk
Size: 14728
SHA256sum: 7ee19751f51ab57c66eeb021e1f4964b7e1e066debb7c06a4518c26e5a653a12
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.1 of the user space utility.
 Only configuration relevant subcommands are enabled.

Package: batmand
Version: 1440-r1
Depends: libc, libpthread, kmod-tun
License: GPL-2.0
Section: net
URL: https://www.open-mesh.org/
Architecture: arm_cortex-a8_vfpv3
Installed-Size: 102400
Filename: batmand_1440-r1_arm_cortex-a8_vfpv3.ipk
Size: 40835
SHA256sum: 8b0727981da3786413a4d415f0ad5a663402239625644616f86725438974f3f3
Description:  B.A.T.M.A.N. layer 3 routing daemon

Package: bird2
Version: 2.15.1-r1
Depends: libc, libpthread
Conflicts: bird1-ipv4, bird1-ipv6, bird4, bird6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: arm_cortex-a8_vfpv3
Installed-Size: 962560
Filename: bird2_2.15.1-r1_arm_cortex-a8_vfpv3.ipk
Size: 378188
SHA256sum: 808a38f61d6fd4ab10930acda5eaf0e5e9d7fda700db3303ec24bb8a1c12db8e
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 BIRD supports OSPFv2, RIPv2, Babel and BGP protocols for IPv4 and
 OSPFv3, RIPng, Babel and BGP protocols for IPv6.
 
 In BGP, BIRD supports communities, multiprotocol extensions, MD5
 authentication, 32bit AS numbers and could act as a route server or a
 route reflector. BIRD also supports multiple RIBs, multiple kernel
 routing tables and redistribution between the protocols with a powerful
 configuration syntax.
 
 This is the 2.0 branch of Bird which integrates support for IPv4 and IPv6
 into a single branch, and also adds support for the Babel routing protocol.

Package: bird2c
Version: 2.15.1-r1
Depends: libc, bird2, libreadline8, libncurses6
Conflicts: bird1c-ipv4, bird1c-ipv6, birdc4, birdc6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: arm_cortex-a8_vfpv3
Installed-Size: 30720
Filename: bird2c_2.15.1-r1_arm_cortex-a8_vfpv3.ipk
Size: 10450
SHA256sum: 2068b2dd23432e4b2e10ef57192d14e9e47f69523a02fc1c0337b9a614474ab4
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 
 Unless you can't afford dependency on ncurses and readline, you
 should install BIRD command-line client together with BIRD.

Package: bird2cl
Version: 2.15.1-r1
Depends: libc, bird2
Conflicts: bird1cl-ipv4, bird1cl-ipv6, birdcl4, birdcl6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: arm_cortex-a8_vfpv3
Installed-Size: 30720
Filename: bird2cl_2.15.1-r1_arm_cortex-a8_vfpv3.ipk
Size: 9048
SHA256sum: 8dd38812746fa38924239935467c79e0a5e0b9d78a8796693125b4d9bd7181f3
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD lightweight command-line client. It is used to send commands
 to BIRD, commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.

Package: bmx7-iwinfo
Version: r2024051906-r1
Depends: libc, bmx7, libiwinfo20230701
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: arm_cortex-a8_vfpv3
Installed-Size: 20480
Filename: bmx7-iwinfo_r2024051906-r1_arm_cortex-a8_vfpv3.ipk
Size: 4777
SHA256sum: 0e7cffcd15a9ef68b6c63ab54a44f89d9acbce4901d90e7b4738fec37478bb84
Description:  link characteristics plugin via libiwinfo (recommended!)

Package: bmx7-json
Version: r2024051906-r1
Depends: libc, bmx7, libjson-c5
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: arm_cortex-a8_vfpv3
Installed-Size: 20480
Filename: bmx7-json_r2024051906-r1_arm_cortex-a8_vfpv3.ipk
Size: 8439
SHA256sum: 5982c01b510baafe4f9d63106abc9ef252c9e1b075b6c1d474c6c0eda3e0b021
Description:  json plugin based on json-c

Package: bmx7-sms
Version: r2024051906-r1
Depends: libc, bmx7
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: arm_cortex-a8_vfpv3
Installed-Size: 20480
Filename: bmx7-sms_r2024051906-r1_arm_cortex-a8_vfpv3.ipk
Size: 6063
SHA256sum: cc802924a282ac173a28fe7f92f320afd4a81b20f24f6b2968deb777e09d142d
Description:  sms plugin

Package: bmx7-table
Version: r2024051906-r1
Depends: libc, bmx7, bmx7-tun
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: arm_cortex-a8_vfpv3
Installed-Size: 30720
Filename: bmx7-table_r2024051906-r1_arm_cortex-a8_vfpv3.ipk
Size: 10369
SHA256sum: 55767f7088e6b0ebebc4f9a2fb85648ab06fbb85ffec2679ee877f3405949e56
Description:  plugin to announce routes from tables via tunnels

Package: bmx7-topology
Version: r2024051906-r1
Depends: libc, bmx7
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: arm_cortex-a8_vfpv3
Installed-Size: 20480
Filename: bmx7-topology_r2024051906-r1_arm_cortex-a8_vfpv3.ipk
Size: 5724
SHA256sum: 012c8783d82b644d292f9132371c627ad015203689ae66b5b01564606bf21854
Description:  topology plugin

Package: bmx7-tun
Version: r2024051906-r1
Depends: libc, bmx7, kmod-ip6-tunnel, kmod-iptunnel6, kmod-tun
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: arm_cortex-a8_vfpv3
Installed-Size: 61440
Filename: bmx7-tun_r2024051906-r1_arm_cortex-a8_vfpv3.ipk
Size: 26318
SHA256sum: 7ec927f87a500d246ae11857397e328428875bce59476c4e288070fbd4401478
Description:  ipip-based tunnel plugin (recommended!)

Package: bmx7-uci-config
Version: r2024051906-r1
Depends: libc, bmx7, libuci20130104
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: arm_cortex-a8_vfpv3
Installed-Size: 30720
Filename: bmx7-uci-config_r2024051906-r1_arm_cortex-a8_vfpv3.ipk
Size: 8894
SHA256sum: 044d1d090132958a61099b401564c0b5de5b9dfb6975993499ae22f2135935e6
Description:  configuration plugin based on uci (recommended!)

Package: bmx7
Version: r2024051906-r1
Depends: libc, zlib, libmbedtls21, libiwinfo20230701
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: arm_cortex-a8_vfpv3
Installed-Size: 348160
Filename: bmx7_r2024051906-r1_arm_cortex-a8_vfpv3.ipk
Size: 172229
SHA256sum: 9e74fbab7478155e0d59d3fc42557adfe673c1eacc0aede13f4ed4e3a4e061e7
Description:  BMX7 routing daemon supporting securely-entrusted IPv6 (and IPv4in6) routing

Package: cjdns-tests
Version: 21.1-r6
Depends: libc, libpthread, librt
License: GPL-3.0-or-later
Section: net
URL: https://github.com/cjdelisle/cjdns
Architecture: arm_cortex-a8_vfpv3
Installed-Size: 737280
Filename: cjdns-tests_21.1-r6_arm_cortex-a8_vfpv3.ipk
Size: 343293
SHA256sum: b9085a3fbf0b7e1ed4fb87e5bb57039dd82a620edaeecdf47653951ad2821fe7
Description:  cjdns test cases

Package: cjdns
Version: 21.1-r6
Depends: libc, kmod-tun, libnl-tiny1, libpthread, librt, libuci-lua, lua-bencode, dkjson, luasocket, lua-sha2
License: GPL-3.0-or-later
Section: net
URL: https://github.com/cjdelisle/cjdns
Architecture: arm_cortex-a8_vfpv3
Installed-Size: 880640
Filename: cjdns_21.1-r6_arm_cortex-a8_vfpv3.ipk
Size: 398346
SHA256sum: e313ed75b2def025fde087fb6f7cc728c347c192d7e17f8dcf175d9780a0a388
Description:  Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks.

Package: hnet-full-l2tp
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-nossl, luci-app-hnet, ip-full, kmod-l2tp-eth, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: arm_cortex-a8_vfpv3
Installed-Size: 10240
Filename: hnet-full-l2tp_2018.12.21~c4376661-r1_arm_cortex-a8_vfpv3.ipk
Size: 1427
SHA256sum: 65bec872f5076d407916f503284e340984bf42f814ad9509aa895c38e5fb14c3
Description:  HNCP Homenet metapackage (w/ L2TP)

Package: hnet-full-secure
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-openssl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: arm_cortex-a8_vfpv3
Installed-Size: 10240
Filename: hnet-full-secure_2018.12.21~c4376661-r1_arm_cortex-a8_vfpv3.ipk
Size: 959
SHA256sum: 55b13f7b90766f9fe7e32fe0a90021fc30bce36a380700ac11b02abeb2a0512d
Description:  HNCP Homenet metapackage (w/ SSL)

Package: hnet-full
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-nossl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: arm_cortex-a8_vfpv3
Installed-Size: 10240
Filename: hnet-full_2018.12.21~c4376661-r1_arm_cortex-a8_vfpv3.ipk
Size: 949
SHA256sum: 15b7c06adce4c543bfb10bf8990c9f9a5e803de5c87ba71ce871543bcb35e679
Description:  HNCP Homenet metapackage

Package: hnetd-nossl
Version: 2018.12.21~c4376661-r1
Depends: libc, odhcpd, odhcp6c, netifd
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: arm_cortex-a8_vfpv3
Installed-Size: 204800
Filename: hnetd-nossl_2018.12.21~c4376661-r1_arm_cortex-a8_vfpv3.ipk
Size: 93164
SHA256sum: 42be600e9a76ef58d246bc8dfb062c672ca1f9060ae9a4293ef6f33a59336a3e
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: hnetd-openssl
Version: 2018.12.21~c4376661-r1
Depends: libc, odhcpd, odhcp6c, netifd, libopenssl3
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: arm_cortex-a8_vfpv3
Installed-Size: 225280
Filename: hnetd-openssl_2018.12.21~c4376661-r1_arm_cortex-a8_vfpv3.ipk
Size: 102818
SHA256sum: 2391370925382002e676466581dfa9759693e045bcf8f0ee0c11a9e76ed470ec
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: luci-app-cjdns
Version: 1.3-r9
Depends: libc, cjdns, luci-compat, luci-base
License: GPL-3.0-or-later
Section: luci
URL: https://github.com/cjdelisle/cjdns
Architecture: arm_cortex-a8_vfpv3
Installed-Size: 40960
Filename: luci-app-cjdns_1.3-r9_arm_cortex-a8_vfpv3.ipk
Size: 6588
SHA256sum: 041e8c42f91963bd4dfe5a8e560300c8bfc3cb213380420c54e5b120111787fc
Description:  Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks.

Package: luci-app-hnet
Version: 2018.12.21~c4376661-r1
Depends: libc
License: GPL-2.0-only
Section: luci
Architecture: arm_cortex-a8_vfpv3
Installed-Size: 235520
Filename: luci-app-hnet_2018.12.21~c4376661-r1_arm_cortex-a8_vfpv3.ipk
Size: 57621
SHA256sum: a3e82f3bb1befb9e0dba0f58df49dd4d452b46b38f8945e650818966a5266886
Description:  HNCP Homenet configuration and visualization

Package: luci-app-olsrd2
Version: 0.2.6-r16
Depends: oonf-olsrd2, luci-mod-admin-full, libc
Section: luci
Architecture: all
Installed-Size: 61440
Filename: luci-app-olsrd2_0.2.6-r16_all.ipk
Size: 7782
SHA256sum: eec3f8cb8d87ec7efbb158abca04090eb109d30732ffe9a92031c45bbca9089d
Description:  OLSR2 configuration and status module

Package: mcproxy
Version: 2017.08.24~93b5ace4-r9
Depends: libc, libpthread, libstdcpp6
License: GPL-2.0-or-later
Section: net
URL: https://mcproxy.realmv6.org
Architecture: arm_cortex-a8_vfpv3
Installed-Size: 317440
Filename: mcproxy_2017.08.24~93b5ace4-r9_arm_cortex-a8_vfpv3.ipk
Size: 123050
SHA256sum: 47fc9e1ea9be9134e7faeec9f10114b992c485bce1983dbdaf7a70e71a770679
Description:  mcproxy is a free & open source implementation of the IGMP/MLD proxy function (see  RFC 4605) for Linux systems.
 It operates on the kernel tables for multicast routing and allows for multiple instantiations,
 as well as dynamically changing downstream interfaces.

Package: mesh11sd
Version: 3.1.1-r1
Depends: libc
License: GPL-2.0-or-later
Section: net
URL: https://github.com/opennds/mesh11sd
Architecture: all
Installed-Size: 92160
Filename: mesh11sd_3.1.1-r1_all.ipk
Size: 19073
SHA256sum: fe28941a7a4ccc33938ce420f23cd2b4ef7fe61f4f509337737179fbf28c4663
Description:  Mesh11sd is a dynamic parameter configuration daemon for 802.11s mesh networks.
 It was originally designed to leverage 802.11s mesh networking at Captive Portal venues.
 This is the open source version and it enables easy and automated mesh network operation with multiple mesh nodes.
 It allows all mesh parameters supported by the wireless driver to be set in the uci config file.
 Settings take effect immediately without having to restart the wireless network.
 Default settings give rapid and reliable layer 2 mesh convergence.
 Without mesh11sd, many mesh parameters cannot be set in the uci wireless config file as the mesh interface must be up before the parameters can be set.
 Some of those that are supported, would fail to be implemented when the network is (re)started resulting in errors or dropped nodes.
 The mesh11sd daemon dynamically checks configured parameters and sets them as required.
 Upstream wan connectivity is checked (eg Internet feed) and when not present, layer 2 peer mode is autonomously enabled,
 and when it is present, layer 3 portal mode is enabled. This allows the same simple router configuration to be used on all meshnodes in the layer 2 mesh.
 Remote terminal sessions and remote file transfers are supported using the meshnode mac address as an identifier.
 This version does not require a Captive Portal to be running.

Package: minimalist-pcproxy
Version: 2014.12.12~2d6d1b0b-r7
Depends: libc, libubox20240329
License: BSD-3-Clause
Section: net
URL: https://github.com/fingon/minimalist-pcproxy
Architecture: arm_cortex-a8_vfpv3
Installed-Size: 20480
Filename: minimalist-pcproxy_2014.12.12~2d6d1b0b-r7_arm_cortex-a8_vfpv3.ipk
Size: 7194
SHA256sum: 7863080bf78036a2216cea2d5c74cce481ac2e863b8a828c8c5846bf860682ad
Description:  This package contains a daemon which can be used to forward
 PCP (Port Control Protocol - RFC6887) requests requests to PCP remote servers.
 
 In and of itself, it is not very useful, but combined with hnetd+miniupnpd
 it allows for control of NAT forwarding and firewall pinholes from multiple
 hops away.

Package: naywatch
Version: 1-r7
Depends: libc, owipcalc
License: GPL-2.0-only
Section: utils
Architecture: all
Installed-Size: 20480
Filename: naywatch_1-r7_all.ipk
Size: 2855
SHA256sum: c983f75c20c9f1d035e44855edbc5a3525863be968070571ddb12a9541f3e13c
Description:  Reboots or triggers watchdog if no link-local neighbor is available.
 
 Important:
 Be careful when you do a sysupgrade. Stop naywatch first, and make
 sure procd took control again of the watchdog.
 You can do this using 'ubus call system watchdog'.  Status should be "running".

Package: ndppd
Version: 0.2.5-r2
Depends: libc, libstdcpp6
License: GPL-3.0-or-later
Section: net
URL: http://www.priv.nu/projects/ndppd/
Architecture: arm_cortex-a8_vfpv3
Installed-Size: 81920
Filename: ndppd_0.2.5-r2_arm_cortex-a8_vfpv3.ipk
Size: 32711
SHA256sum: 3a3b9bb06469db97f147a7a630e3722b203b05aa70c1d243ad7f795ad39a324c
Description:  ndppd, or NDP Proxy Daemon, is a daemon that proxies NDP (Neighbor Discovery
 Protocol) messages between interfaces.  ndppd currently only supports Neighbor
 Solicitation Messages and Neighbor Advertisement Messages.
 
 The ndp_proxy provided by Linux doesn't support listing proxies, and only hosts
 are supported.  No subnets.  ndppd solves this by listening for Neighbor
 Solicitation messages on an interface, then query the internal interfaces for
 that target IP before finally sending a Neighbor Advertisement message.

Package: nodogsplash
Version: 5.0.2-r1
Depends: libc, libpthread, libmicrohttpd-no-ssl, iptables-nft, iptables-mod-nat-extra, iptables-mod-ipopt, iptables-mod-conntrack-extra
License: GPL-2.0-or-later
Section: net
URL: https://github.com/nodogsplash/nodogsplash
Architecture: arm_cortex-a8_vfpv3
Installed-Size: 122880
Filename: nodogsplash_5.0.2-r1_arm_cortex-a8_vfpv3.ipk
Size: 47014
SHA256sum: 4a9c662ac9d1ecad0f6a2551f0d913000a8a09f39922171f11e7fe7af967a336
Description:  Nodogsplash is a Captive Portal that offers a simple way to
 provide restricted access to the Internet by showing a splash
 page to the user before Internet access is granted.

Package: ohybridproxy
Version: 2020.05.22~0dfef1eb-r3
Depends: libc, libubox20240329, mdnsd
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/ohybridproxy
Architecture: arm_cortex-a8_vfpv3
Installed-Size: 30720
Filename: ohybridproxy_2020.05.22~0dfef1eb-r3_arm_cortex-a8_vfpv3.ipk
Size: 11054
SHA256sum: c69399df1933157152de7914bd3bac19d6dd2f60028182a8f24629021cec26b6
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.

Package: olsrd-mod-arprefresh
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_cortex-a8_vfpv3
Installed-Size: 10240
Filename: olsrd-mod-arprefresh_2023.06.12~a9b3f1ac-r1_arm_cortex-a8_vfpv3.ipk
Size: 2769
SHA256sum: 569689c1cdd14ae23a4241e625409eab82fce96fc472e1cd643d422c33fdac34
Description:  Kernel ARP cache refresh plugin

Package: olsrd-mod-bmf
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd, kmod-tun
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_cortex-a8_vfpv3
Installed-Size: 30720
Filename: olsrd-mod-bmf_2023.06.12~a9b3f1ac-r1_arm_cortex-a8_vfpv3.ipk
Size: 12702
SHA256sum: 189e8382ba6113f1aa9f09f72d66441f2230caa28f54fb52afc26a5a8c3c6f8e
Description:  Basic multicast forwarding plugin

Package: olsrd-mod-dot-draw
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_cortex-a8_vfpv3
Installed-Size: 20480
Filename: olsrd-mod-dot-draw_2023.06.12~a9b3f1ac-r1_arm_cortex-a8_vfpv3.ipk
Size: 4584
SHA256sum: a9502d01ba16935d949eab2e7635000c1204a1ffa62d82b7b0feb47427624b34
Description:  Dot topology information plugin

Package: olsrd-mod-dyn-gw-plain
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_cortex-a8_vfpv3
Installed-Size: 20480
Filename: olsrd-mod-dyn-gw-plain_2023.06.12~a9b3f1ac-r1_arm_cortex-a8_vfpv3.ipk
Size: 3064
SHA256sum: 478dc6c6a7ef3baf573a65b767d33a6aea2494bafa9ba633ef7a22abf4211b6c
Description:  Dynamic internet gateway plain plugin

Package: olsrd-mod-dyn-gw
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_cortex-a8_vfpv3
Installed-Size: 20480
Filename: olsrd-mod-dyn-gw_2023.06.12~a9b3f1ac-r1_arm_cortex-a8_vfpv3.ipk
Size: 4755
SHA256sum: 6c084db3e88c440d7e41e18d95f11fc2104da368530298726c1fa8af1bf0781e
Description:  Dynamic internet gateway plugin

Package: olsrd-mod-filtergw
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_cortex-a8_vfpv3
Installed-Size: 20480
Filename: olsrd-mod-filtergw_2023.06.12~a9b3f1ac-r1_arm_cortex-a8_vfpv3.ipk
Size: 3291
SHA256sum: 551f8cf491480aa89ec3692aa2c31cdf3b3259ce2f6ded077ff79b1a7029d113
Description:  Filter Gateway plugin

Package: olsrd-mod-httpinfo
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_cortex-a8_vfpv3
Installed-Size: 81920
Filename: olsrd-mod-httpinfo_2023.06.12~a9b3f1ac-r1_arm_cortex-a8_vfpv3.ipk
Size: 33277
SHA256sum: 567b572f9ca4f2ef6803f97bedeedd34da3c6bb693af7cdca1148cd6ff22a0cb
Description:  Small informative web server plugin

Package: olsrd-mod-jsoninfo
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_cortex-a8_vfpv3
Installed-Size: 61440
Filename: olsrd-mod-jsoninfo_2023.06.12~a9b3f1ac-r1_arm_cortex-a8_vfpv3.ipk
Size: 25129
SHA256sum: a558f44e861974ff9a81122338b72035a5099c1b8e955e4dfb872e1c3286f2ed
Description:  Small informative plugin with JSON output

Package: olsrd-mod-mdns
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_cortex-a8_vfpv3
Installed-Size: 30720
Filename: olsrd-mod-mdns_2023.06.12~a9b3f1ac-r1_arm_cortex-a8_vfpv3.ipk
Size: 9781
SHA256sum: 86c38bdaaf9fd6fcec7be688277a39d5978a2d58aee96a4e40d42370544a6101
Description:  MDNS/Zeroconf/Bonjour packet distribution

Package: olsrd-mod-nameservice
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_cortex-a8_vfpv3
Installed-Size: 30720
Filename: olsrd-mod-nameservice_2023.06.12~a9b3f1ac-r1_arm_cortex-a8_vfpv3.ipk
Size: 11560
SHA256sum: ab41362d3c6a54fb8d3e8417820165159a0dfc10c91edbd6140838d17cad0932
Description:  Lightweight hostname resolver plugin

Package: olsrd-mod-netjson
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_cortex-a8_vfpv3
Installed-Size: 40960
Filename: olsrd-mod-netjson_2023.06.12~a9b3f1ac-r1_arm_cortex-a8_vfpv3.ipk
Size: 14387
SHA256sum: 77adfb29eae3b8646837455ce50e8ac774a180eefe930b66d8cfdb04529434e1
Description:  netjson plugin with JSON output

Package: olsrd-mod-p2pd
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_cortex-a8_vfpv3
Installed-Size: 20480
Filename: olsrd-mod-p2pd_2023.06.12~a9b3f1ac-r1_arm_cortex-a8_vfpv3.ipk
Size: 8957
SHA256sum: 608af49e1fbcec545cdcdf16336f260f6d5aa66eb9cef99b0c5b76d32d4df8c9
Description:  Peer to Peer Discovery plugin

Package: olsrd-mod-pgraph
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_cortex-a8_vfpv3
Installed-Size: 20480
Filename: olsrd-mod-pgraph_2023.06.12~a9b3f1ac-r1_arm_cortex-a8_vfpv3.ipk
Size: 3659
SHA256sum: b3cf86cf1d782e71e1884acc4d9dbd180a7c25edee56d08707068be07e8cb14d
Description:  output network topology for pgraph

Package: olsrd-mod-pud
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd, libgps30
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_cortex-a8_vfpv3
Installed-Size: 174080
Filename: olsrd-mod-pud_2023.06.12~a9b3f1ac-r1_arm_cortex-a8_vfpv3.ipk
Size: 58594
SHA256sum: 0637cf327c85c07a864cb69528ee976afd83dd1e202cb7251d8fab0ad1ce6b04
Description:  Position Update Distribution plugin

Package: olsrd-mod-quagga
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_cortex-a8_vfpv3
Installed-Size: 20480
Filename: olsrd-mod-quagga_2023.06.12~a9b3f1ac-r1_arm_cortex-a8_vfpv3.ipk
Size: 6865
SHA256sum: 67a646c3678b8220c85be93e7cbdfb0293253f41cd31ada88c7c16e48c44724e
Description:  Quagga plugin

Package: olsrd-mod-secure
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_cortex-a8_vfpv3
Installed-Size: 30720
Filename: olsrd-mod-secure_2023.06.12~a9b3f1ac-r1_arm_cortex-a8_vfpv3.ipk
Size: 11178
SHA256sum: e9f473d24bf15c09963bc25c7b9c185bb5c8ddd2368f571a72c2f1bc23a87b22
Description:  Message signing plugin to secure routing domain

Package: olsrd-mod-sgwdynspeed
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_cortex-a8_vfpv3
Installed-Size: 20480
Filename: olsrd-mod-sgwdynspeed_2023.06.12~a9b3f1ac-r1_arm_cortex-a8_vfpv3.ipk
Size: 5110
SHA256sum: ecdcb45829665641a1bb436989d500f06854b194f41d37e0357f58fc213405f2
Description:  Smart Gateway dynamic speed plugin

Package: olsrd-mod-txtinfo
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_cortex-a8_vfpv3
Installed-Size: 40960
Filename: olsrd-mod-txtinfo_2023.06.12~a9b3f1ac-r1_arm_cortex-a8_vfpv3.ipk
Size: 16312
SHA256sum: e7a23231a9cf7b3b913a34215aa5f62b20c17a5dc214f7cd722560f456593e3c
Description:  Small informative web server plugin

Package: olsrd-mod-watchdog
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_cortex-a8_vfpv3
Installed-Size: 10240
Filename: olsrd-mod-watchdog_2023.06.12~a9b3f1ac-r1_arm_cortex-a8_vfpv3.ipk
Size: 2364
SHA256sum: 252d24b66e1c28146eb0b52d9616e08695b2d1e1c77fe1a3d8f19063f4da7b6c
Description:  Watchdog plugin

Package: olsrd-utils
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_cortex-a8_vfpv3
Installed-Size: 10240
Filename: olsrd-utils_2023.06.12~a9b3f1ac-r1_arm_cortex-a8_vfpv3.ipk
Size: 1962
SHA256sum: fffc0e48ec5bf17858e7bee2160d50f7f5b19be9c05668c2467503ad97a97048
Description:  Utils for OLSRD

Package: olsrd
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, libpthread, libubus20231128, iptables, ip6tables
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_cortex-a8_vfpv3
Installed-Size: 317440
Filename: olsrd_2023.06.12~a9b3f1ac-r1_arm_cortex-a8_vfpv3.ipk
Size: 140258
SHA256sum: 07cacf4e152a753ae0635a3881198f7306b0df7f1c3262492c23a03b51941ad5
Description:  OLSR (Optimized Link State Routing) daemon

Package: oonf-dlep-proxy
Version: 2022.08.25~fb15d54d
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: arm_cortex-a8_vfpv3
Installed-Size: 378880
Filename: oonf-dlep-proxy_2022.08.25~fb15d54d_arm_cortex-a8_vfpv3.ipk
Size: 161275
SHA256sum: fce76e9897066ee52c9a3843b542346085550de23009e73bb90c6e016526e074
Description:  Build DLEP Radio+Router Agent

Package: oonf-dlep-radio
Version: 2022.08.25~fb15d54d
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: arm_cortex-a8_vfpv3
Installed-Size: 368640
Filename: oonf-dlep-radio_2022.08.25~fb15d54d_arm_cortex-a8_vfpv3.ipk
Size: 157366
SHA256sum: 3b6eb7af739efb9ee97c1d301a64eccf42f0dfb800628fc1f6ad4330fe2d20cd
Description:  Build DLEP Radio Agent

Package: oonf-init-scripts
Version: 0.9.1-r3
Depends: libc
Section: net
URL: http://www.olsr.org/
Architecture: arm_cortex-a8_vfpv3
Installed-Size: 10240
Filename: oonf-init-scripts_0.9.1-r3_arm_cortex-a8_vfpv3.ipk
Size: 2304
SHA256sum: 8256d65c6554ecf3faf76d7fd108b92d68cc873c0e10de6a434114d802c99b21
Description:  Common OONF startup scripts

Package: oonf-olsrd2
Version: 2022.08.25~1cec9b21
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: arm_cortex-a8_vfpv3
Installed-Size: 532480
Filename: oonf-olsrd2_2022.08.25~1cec9b21_arm_cortex-a8_vfpv3.ipk
Size: 233350
SHA256sum: a144558f4fcae71809d83e91e9f105e9e9ce525eddc8a0d6e6fc89b6735bec10
Description:  Build Olsrd V2 Routing Agent

Package: opennds
Version: 10.2.0-r1
Depends: libc, libmicrohttpd-no-ssl
Conflicts: nodogsplash
License: GPL-2.0-or-later
Section: net
URL: https://github.com/opennds/opennds
Architecture: arm_cortex-a8_vfpv3
Installed-Size: 552960
Filename: opennds_10.2.0-r1_arm_cortex-a8_vfpv3.ipk
Size: 159113
SHA256sum: 84d7e855c34d6f164eca1150215f4d6eea0ba2c1d1980d94dda16659a1c66e37
Description:  openNDS (open Network Demarcation Service) is a high performance, small footprint, Captive Portal.
 It provides a border control gateway between a public local area network and the Internet.
 It supports all scenarios ranging from small stand alone venues through to large mesh networks with multiple portal entry points.
 Both the client driven Captive Portal Detection method (CPD) and gateway driven Captive Portal Identification method (CPI - RFC 8910 and RFC 8908) are supported.
 This version uses nftables.

Package: pimbd
Version: 2018.06.19~dbf4e591-r4
Depends: libc, netifd
License: Apache-2.0
Section: net
URL: https://github.com/Oryon/pimbd.git
Architecture: arm_cortex-a8_vfpv3
Installed-Size: 194560
Filename: pimbd_2018.06.19~dbf4e591-r4_arm_cortex-a8_vfpv3.ipk
Size: 82798
SHA256sum: 050b84967d2c4cc6eb2c126f8917e2c9c45d86747849c0d589c794d49b45ec41
Description:  This package provides a daemon which implements the Protocol Independent
 Multicast BIDIR routing protocol. Note that a routing protocol must be
 installed and running in order for PIM to function.

Package: prince
Version: 0.4-r3
Depends: libc, libjson-c5, libpthread
License: MIT
Section: net
URL: https://github.com/AdvancedNetworkingSystems/prince
Architecture: arm_cortex-a8_vfpv3
Installed-Size: 71680
Filename: prince_0.4-r3_arm_cortex-a8_vfpv3.ipk
Size: 26519
SHA256sum: e7ce1a5b12e8dcf6d3e89ce3417c50c597290a4098815123e68c7eefdab1969f
Description:  Prince is an open source implementation of the PopRouting Algorithm.
 It has been developed as a Google Summer of Code Project in collaboration with Freifunk and the University of Trento.
 
 Prince fetches topology data from a Link State routing daemon (OONF, OLSR, OSPF, etc),
 calculates the betweenness centrality using the topology and then computes the
 the timers' optimal values using these data. At the end of the computation the timers are pushed back to the routing daemon.
 Since v0.4 it supports both OONF and OLSRd.

Package: vis
Version: 2013.04.07~7710cce4-r9
Depends: libc, libpthread
License: GPL-2.0-only
Section: net
URL: https://www.open-mesh.org/
Architecture: arm_cortex-a8_vfpv3
Installed-Size: 30720
Filename: vis_2013.04.07~7710cce4-r9_arm_cortex-a8_vfpv3.ipk
Size: 10887
SHA256sum: 9e0f2d6eb175b22eb29cac16a5ff8bd832f1a8d3dd7ad3522844dd2e5bfe8f59
Description:  visualization server for B.A.T.M.A.N. layer 3

Package: zonestitcher
Version: 2020.05.22~0dfef1eb-r3
Depends: libc, libubox20240329
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/ohybridproxy
Architecture: arm_cortex-a8_vfpv3
Installed-Size: 20480
Filename: zonestitcher_2020.05.22~0dfef1eb-r3_arm_cortex-a8_vfpv3.ipk
Size: 8944
SHA256sum: 8bc4abf3470501cfedadb8da778119e06d89ae21049f1612b15b2c051ca26539
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.