Package: ahcpd
Version: 0.53-r3
Depends: libc, ip, librt
License: MIT
Section: net
URL: https://www.irif.fr/~jch/software/ahcp/
Architecture: riscv64_riscv64
Installed-Size: 61440
Filename: ahcpd_0.53-r3_riscv64_riscv64.ipk
Size: 25006
SHA256sum: faf7e0fb8d6bc3e863547d0eec8fa14e4d35d8cdff2982804ab1ef83383ef705
Description:  Ahcpd is a daemon for configuring an IPv6 network using the Ad-Hoc
 Configuration Protocol (AHCP).  AHCP is designed for wireless mesh
 networks, where IPv6 autoconfiguration and DHCPv6 do not work, but may
 also be used on wired networks.

Package: alfred
Version: 2024.1-r1
Depends: libc, libnl-tiny1, librt
License: GPL-2.0-only MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: riscv64_riscv64
Installed-Size: 71680
Filename: alfred_2024.1-r1_riscv64_riscv64.ipk
Size: 29741
SHA256sum: 3cb1622e2e2f7c3446cd1378d225e9a14d449113cfdff065513ba8d4b0d63cc6
Description:  alfred is a user space daemon for distributing arbitrary local information
 over the mesh/network in a decentralized fashion. This data can be anything
 which appears to be useful - originally designed to replace the batman-adv
 visualization (vis), you may distribute hostnames, phone books, administration
 information, DNS information, the local weather forecast ...
 
 alfred runs as daemon in the background of the system. A user may insert
 information by using the alfred binary on the command line, or use special
 programs to communicate with alfred (done via unix sockets). alfred then takes
 care of distributing the local information to other alfred servers on other
 nodes. This is done via IPv6 link-local multicast, and does not require any
 configuration. A user can request data from alfred, and will receive the
 information available from all alfred servers in the network.

Package: babel-pinger
Version: 0.1-r1
Depends: libc, librt
Section: net
URL: http://www.pps.univ-paris-diderot.fr/~jch/software/babel/
Architecture: riscv64_riscv64
Installed-Size: 20480
Filename: babel-pinger_0.1-r1_riscv64_riscv64.ipk
Size: 5020
SHA256sum: 44f45fa2b563c7dc4a0b49e0a642bb4171a94b9b94f7976a462e156ff1227ea4
Description:  Babel-pinger is a hack to export a default route into Babel for people
 using DHCP to configure their routers rather than speaking to their
 upstream provider with a proper routing protocol.

Package: babeld
Version: 1.13.1-r1
Depends: libc, libubus20231128, libubox20240329
License: MIT
Section: net
URL: https://www.irif.fr/~jch/software/babel/
Architecture: riscv64_riscv64
Installed-Size: 143360
Filename: babeld_1.13.1-r1_riscv64_riscv64.ipk
Size: 73219
SHA256sum: 7bbee731c5e60c36c2a97a5c0a61e8130dd5faa2bfa81550afabc4bde02a7d94
Description:  Babel is a loop-avoiding distance-vector routing protocol for IPv6 and IPv4
 with fast convergence properties. It is based on the ideas in DSDV, AODV and
 Cisco's EIGRP, but is designed to work well not only in wired networks but
 also in wireless mesh networks, and has been extended with support for
 overlay networks. Babel is an IETF standard protocol (RFC 8966).

Package: batctl-default
Version: 2024.1-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 200:/usr/sbin/batctl:/usr/libexec/batctl-default
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: riscv64_riscv64
Installed-Size: 112640
Filename: batctl-default_2024.1-r1_riscv64_riscv64.ipk
Size: 48496
SHA256sum: 3f1797e61b2f8469b5115461c09db61ed4dcdeecd0ad31248c53dbf67b6c92a5
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.1 of the user space utility.
 Standard subcommands for configuration and online debugging are enabled.

Package: batctl-full
Version: 2024.1-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 300:/usr/sbin/batctl:/usr/libexec/batctl-full
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: riscv64_riscv64
Installed-Size: 122880
Filename: batctl-full_2024.1-r1_riscv64_riscv64.ipk
Size: 55031
SHA256sum: 923bf8b6a2584953e74112dc726f74965300a7feb9d98dc43d5079e2bb11e9ff
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.1 of the user space utility.
 Subcommands for configuration, online and offline debugging are enabled.

Package: batctl-tiny
Version: 2024.1-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 100:/usr/sbin/batctl:/usr/libexec/batctl-tiny
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: riscv64_riscv64
Installed-Size: 51200
Filename: batctl-tiny_2024.1-r1_riscv64_riscv64.ipk
Size: 17283
SHA256sum: e6338ad816244ac1079f88007141abd55975f11af6624a57250987913535de69
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.1 of the user space utility.
 Only configuration relevant subcommands are enabled.

Package: batmand
Version: 1440-r1
Depends: libc, libpthread, kmod-tun
License: GPL-2.0
Section: net
URL: https://www.open-mesh.org/
Architecture: riscv64_riscv64
Installed-Size: 102400
Filename: batmand_1440-r1_riscv64_riscv64.ipk
Size: 45606
SHA256sum: a2f25388d93ca1673686aeba17a3fcd4ba911ab67cc51834db21e86c8d898cce
Description:  B.A.T.M.A.N. layer 3 routing daemon

Package: bird2
Version: 2.15.1-r1
Depends: libc, libpthread
Conflicts: bird1-ipv4, bird1-ipv6, bird4, bird6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: riscv64_riscv64
Installed-Size: 983040
Filename: bird2_2.15.1-r1_riscv64_riscv64.ipk
Size: 415284
SHA256sum: 91a4cea847a209de7da8ab4d5aec9f4caa9de0f023bf2a4164b2ae3c43d54202
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 BIRD supports OSPFv2, RIPv2, Babel and BGP protocols for IPv4 and
 OSPFv3, RIPng, Babel and BGP protocols for IPv6.
 
 In BGP, BIRD supports communities, multiprotocol extensions, MD5
 authentication, 32bit AS numbers and could act as a route server or a
 route reflector. BIRD also supports multiple RIBs, multiple kernel
 routing tables and redistribution between the protocols with a powerful
 configuration syntax.
 
 This is the 2.0 branch of Bird which integrates support for IPv4 and IPv6
 into a single branch, and also adds support for the Babel routing protocol.

Package: bird2c
Version: 2.15.1-r1
Depends: libc, bird2, libreadline8, libncurses6
Conflicts: bird1c-ipv4, bird1c-ipv6, birdc4, birdc6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: riscv64_riscv64
Installed-Size: 40960
Filename: bird2c_2.15.1-r1_riscv64_riscv64.ipk
Size: 11329
SHA256sum: 3b78c6e7a431c80f58b73beb5c34915f6b7a39b1681ebd0ded9196161a9e8cec
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 
 Unless you can't afford dependency on ncurses and readline, you
 should install BIRD command-line client together with BIRD.

Package: bird2cl
Version: 2.15.1-r1
Depends: libc, bird2
Conflicts: bird1cl-ipv4, bird1cl-ipv6, birdcl4, birdcl6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: riscv64_riscv64
Installed-Size: 30720
Filename: bird2cl_2.15.1-r1_riscv64_riscv64.ipk
Size: 9829
SHA256sum: 82c94d91ad1af256a9944bd8a038a6353fa90da9373b0244ebd0278f763cb890
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD lightweight command-line client. It is used to send commands
 to BIRD, commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.

Package: bmx7-iwinfo
Version: r2024051906-r1
Depends: libc, bmx7, libiwinfo20230701
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: riscv64_riscv64
Installed-Size: 20480
Filename: bmx7-iwinfo_r2024051906-r1_riscv64_riscv64.ipk
Size: 4844
SHA256sum: 787ec8a81b2eee2ea1ea47cbb727085e75ca74c86bcec0e407cb560d1e0e9bc6
Description:  link characteristics plugin via libiwinfo (recommended!)

Package: bmx7-json
Version: r2024051906-r1
Depends: libc, bmx7, libjson-c5
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: riscv64_riscv64
Installed-Size: 20480
Filename: bmx7-json_r2024051906-r1_riscv64_riscv64.ipk
Size: 8779
SHA256sum: 2d5d8f442ff191dd9061e7dc6cf3bce529b1ea2c820fead7ef57b14151c0e677
Description:  json plugin based on json-c

Package: bmx7-sms
Version: r2024051906-r1
Depends: libc, bmx7
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: riscv64_riscv64
Installed-Size: 20480
Filename: bmx7-sms_r2024051906-r1_riscv64_riscv64.ipk
Size: 6494
SHA256sum: a56a00bba1c4b591954df84ac9cf620d60d37307ce78cdf00a59dd89762f283f
Description:  sms plugin

Package: bmx7-table
Version: r2024051906-r1
Depends: libc, bmx7, bmx7-tun
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: riscv64_riscv64
Installed-Size: 30720
Filename: bmx7-table_r2024051906-r1_riscv64_riscv64.ipk
Size: 10526
SHA256sum: 7e39182b29119156511601f875745a568f1113b8262c2400bbac3d5f4272dc2b
Description:  plugin to announce routes from tables via tunnels

Package: bmx7-topology
Version: r2024051906-r1
Depends: libc, bmx7
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: riscv64_riscv64
Installed-Size: 20480
Filename: bmx7-topology_r2024051906-r1_riscv64_riscv64.ipk
Size: 5839
SHA256sum: ea0b5306dc7e915ec6a61f0b68cdd033d4003beed1da3c6dcbef16f649b95bad
Description:  topology plugin

Package: bmx7-tun
Version: r2024051906-r1
Depends: libc, bmx7, kmod-ip6-tunnel, kmod-iptunnel6, kmod-tun
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: riscv64_riscv64
Installed-Size: 71680
Filename: bmx7-tun_r2024051906-r1_riscv64_riscv64.ipk
Size: 26688
SHA256sum: 087f05260ddd4d08e9f8110ce7b7e142e93bc35d08f666b1617b0f4363c763a7
Description:  ipip-based tunnel plugin (recommended!)

Package: bmx7-uci-config
Version: r2024051906-r1
Depends: libc, bmx7, libuci20130104
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: riscv64_riscv64
Installed-Size: 30720
Filename: bmx7-uci-config_r2024051906-r1_riscv64_riscv64.ipk
Size: 9172
SHA256sum: 10752fecb149ad474ed45aed1f5936120f3b62124bbbbd46b0435a267fbf2e5f
Description:  configuration plugin based on uci (recommended!)

Package: bmx7
Version: r2024051906-r1
Depends: libc, zlib, libmbedtls21, libiwinfo20230701
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: riscv64_riscv64
Installed-Size: 337920
Filename: bmx7_r2024051906-r1_riscv64_riscv64.ipk
Size: 172155
SHA256sum: 89b58e906735ab250860a1af3940c4f60c807c768773a460690a1e9b4c14caf3
Description:  BMX7 routing daemon supporting securely-entrusted IPv6 (and IPv4in6) routing

Package: hnet-full-l2tp
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-nossl, luci-app-hnet, ip-full, kmod-l2tp-eth, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: riscv64_riscv64
Installed-Size: 10240
Filename: hnet-full-l2tp_2018.12.21~c4376661-r1_riscv64_riscv64.ipk
Size: 1418
SHA256sum: a7b2ace4b3b1d0b0a4f37e08df3e73f898a550fceb6ceb31a91814deb856f5b1
Description:  HNCP Homenet metapackage (w/ L2TP)

Package: hnet-full-secure
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-openssl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: riscv64_riscv64
Installed-Size: 10240
Filename: hnet-full-secure_2018.12.21~c4376661-r1_riscv64_riscv64.ipk
Size: 948
SHA256sum: ec05a4a5f712814f302828c1d8431cea8ce45b1eac8fcef115fa080b9b3063cd
Description:  HNCP Homenet metapackage (w/ SSL)

Package: hnet-full
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-nossl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: riscv64_riscv64
Installed-Size: 10240
Filename: hnet-full_2018.12.21~c4376661-r1_riscv64_riscv64.ipk
Size: 940
SHA256sum: ff1baa7b4e763e9671e16d75497ebe425591286330ad2933a460d6224275e5ce
Description:  HNCP Homenet metapackage

Package: hnetd-nossl
Version: 2018.12.21~c4376661-r1
Depends: libc, odhcpd, odhcp6c, netifd
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: riscv64_riscv64
Installed-Size: 215040
Filename: hnetd-nossl_2018.12.21~c4376661-r1_riscv64_riscv64.ipk
Size: 106541
SHA256sum: b1f921e9addd97e25e92b2fcd80900aad0d9b321d52528b8f3b6c22b0cd875d3
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: hnetd-openssl
Version: 2018.12.21~c4376661-r1
Depends: libc, odhcpd, odhcp6c, netifd, libopenssl3
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: riscv64_riscv64
Installed-Size: 245760
Filename: hnetd-openssl_2018.12.21~c4376661-r1_riscv64_riscv64.ipk
Size: 117223
SHA256sum: 2806370a3e219746f9aa248620e42fd942cc053ca859192764488ae38332a131
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: luci-app-cjdns
Version: 1.3-r9
Depends: libc, cjdns, luci-compat, luci-base
License: GPL-3.0-or-later
Section: luci
URL: https://github.com/cjdelisle/cjdns
Architecture: riscv64_riscv64
Installed-Size: 40960
Filename: luci-app-cjdns_1.3-r9_riscv64_riscv64.ipk
Size: 6591
SHA256sum: 307f25068610c8d01654f751f7166ebb51923721c0effb365a943c1b9d691a9b
Description:  Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks.

Package: luci-app-hnet
Version: 2018.12.21~c4376661-r1
Depends: libc
License: GPL-2.0-only
Section: luci
Architecture: riscv64_riscv64
Installed-Size: 235520
Filename: luci-app-hnet_2018.12.21~c4376661-r1_riscv64_riscv64.ipk
Size: 57609
SHA256sum: 9f259977443ce5dc4d50e5fd60a1ae3af1f7a0ea71d31b0afd7c6af10f763b0e
Description:  HNCP Homenet configuration and visualization

Package: luci-app-olsrd2
Version: 0.2.6-r16
Depends: oonf-olsrd2, luci-mod-admin-full, libc
Section: luci
Architecture: all
Installed-Size: 61440
Filename: luci-app-olsrd2_0.2.6-r16_all.ipk
Size: 7782
SHA256sum: eec3f8cb8d87ec7efbb158abca04090eb109d30732ffe9a92031c45bbca9089d
Description:  OLSR2 configuration and status module

Package: mcproxy
Version: 2017.08.24~93b5ace4-r9
Depends: libc, libpthread, libstdcpp6
License: GPL-2.0-or-later
Section: net
URL: https://mcproxy.realmv6.org
Architecture: riscv64_riscv64
Installed-Size: 337920
Filename: mcproxy_2017.08.24~93b5ace4-r9_riscv64_riscv64.ipk
Size: 131872
SHA256sum: 4a34c7ac9ed289b60ca03ddd413233bbc63c4a2b86491f9d0f542651e5c67e5f
Description:  mcproxy is a free & open source implementation of the IGMP/MLD proxy function (see  RFC 4605) for Linux systems.
 It operates on the kernel tables for multicast routing and allows for multiple instantiations,
 as well as dynamically changing downstream interfaces.

Package: mesh11sd
Version: 3.1.1-r1
Depends: libc
License: GPL-2.0-or-later
Section: net
URL: https://github.com/opennds/mesh11sd
Architecture: all
Installed-Size: 92160
Filename: mesh11sd_3.1.1-r1_all.ipk
Size: 19073
SHA256sum: fe28941a7a4ccc33938ce420f23cd2b4ef7fe61f4f509337737179fbf28c4663
Description:  Mesh11sd is a dynamic parameter configuration daemon for 802.11s mesh networks.
 It was originally designed to leverage 802.11s mesh networking at Captive Portal venues.
 This is the open source version and it enables easy and automated mesh network operation with multiple mesh nodes.
 It allows all mesh parameters supported by the wireless driver to be set in the uci config file.
 Settings take effect immediately without having to restart the wireless network.
 Default settings give rapid and reliable layer 2 mesh convergence.
 Without mesh11sd, many mesh parameters cannot be set in the uci wireless config file as the mesh interface must be up before the parameters can be set.
 Some of those that are supported, would fail to be implemented when the network is (re)started resulting in errors or dropped nodes.
 The mesh11sd daemon dynamically checks configured parameters and sets them as required.
 Upstream wan connectivity is checked (eg Internet feed) and when not present, layer 2 peer mode is autonomously enabled,
 and when it is present, layer 3 portal mode is enabled. This allows the same simple router configuration to be used on all meshnodes in the layer 2 mesh.
 Remote terminal sessions and remote file transfers are supported using the meshnode mac address as an identifier.
 This version does not require a Captive Portal to be running.

Package: minimalist-pcproxy
Version: 2014.12.12~2d6d1b0b-r7
Depends: libc, libubox20240329
License: BSD-3-Clause
Section: net
URL: https://github.com/fingon/minimalist-pcproxy
Architecture: riscv64_riscv64
Installed-Size: 20480
Filename: minimalist-pcproxy_2014.12.12~2d6d1b0b-r7_riscv64_riscv64.ipk
Size: 8235
SHA256sum: ddebaa8d1995166f01da40e2d7c0086fb6ca1b5712242f4bf3a71c34b84c357b
Description:  This package contains a daemon which can be used to forward
 PCP (Port Control Protocol - RFC6887) requests requests to PCP remote servers.
 
 In and of itself, it is not very useful, but combined with hnetd+miniupnpd
 it allows for control of NAT forwarding and firewall pinholes from multiple
 hops away.

Package: naywatch
Version: 1-r7
Depends: libc, owipcalc
License: GPL-2.0-only
Section: utils
Architecture: all
Installed-Size: 20480
Filename: naywatch_1-r7_all.ipk
Size: 2851
SHA256sum: 14de223c05b3b857845a1dbda4b63aa4f2a444c6aa17d813d4752b90696037a0
Description:  Reboots or triggers watchdog if no link-local neighbor is available.
 
 Important:
 Be careful when you do a sysupgrade. Stop naywatch first, and make
 sure procd took control again of the watchdog.
 You can do this using 'ubus call system watchdog'.  Status should be "running".

Package: ndppd
Version: 0.2.5-r2
Depends: libc, libstdcpp6
License: GPL-3.0-or-later
Section: net
URL: http://www.priv.nu/projects/ndppd/
Architecture: riscv64_riscv64
Installed-Size: 81920
Filename: ndppd_0.2.5-r2_riscv64_riscv64.ipk
Size: 34864
SHA256sum: c1a9e8f70ad2d024a86b91a5e2a6a8d1d2b70c37e92eb932105c091f67f950e1
Description:  ndppd, or NDP Proxy Daemon, is a daemon that proxies NDP (Neighbor Discovery
 Protocol) messages between interfaces.  ndppd currently only supports Neighbor
 Solicitation Messages and Neighbor Advertisement Messages.
 
 The ndp_proxy provided by Linux doesn't support listing proxies, and only hosts
 are supported.  No subnets.  ndppd solves this by listening for Neighbor
 Solicitation messages on an interface, then query the internal interfaces for
 that target IP before finally sending a Neighbor Advertisement message.

Package: nodogsplash
Version: 5.0.2-r1
Depends: libc, libpthread, libmicrohttpd-no-ssl, iptables-nft, iptables-mod-nat-extra, iptables-mod-ipopt, iptables-mod-conntrack-extra
License: GPL-2.0-or-later
Section: net
URL: https://github.com/nodogsplash/nodogsplash
Architecture: riscv64_riscv64
Installed-Size: 133120
Filename: nodogsplash_5.0.2-r1_riscv64_riscv64.ipk
Size: 51546
SHA256sum: 8a9e05ffb56caaa2a89bd807448a71ba67651aa877a06e459d064cbde4f227eb
Description:  Nodogsplash is a Captive Portal that offers a simple way to
 provide restricted access to the Internet by showing a splash
 page to the user before Internet access is granted.

Package: ohybridproxy
Version: 2020.05.22~0dfef1eb-r3
Depends: libc, libubox20240329, mdnsd
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/ohybridproxy
Architecture: riscv64_riscv64
Installed-Size: 40960
Filename: ohybridproxy_2020.05.22~0dfef1eb-r3_riscv64_riscv64.ipk
Size: 13363
SHA256sum: c9753818eb5de5992ba7fb7ca555656c9635a78930b91dbddf6e944a29631765
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.

Package: olsrd-mod-arprefresh
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: riscv64_riscv64
Installed-Size: 20480
Filename: olsrd-mod-arprefresh_2023.06.12~a9b3f1ac-r1_riscv64_riscv64.ipk
Size: 2959
SHA256sum: 7a33ee19a31c7915c172930be4b4044c14fba33643721384fbb5386add0c5fb4
Description:  Kernel ARP cache refresh plugin

Package: olsrd-mod-bmf
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd, kmod-tun
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: riscv64_riscv64
Installed-Size: 40960
Filename: olsrd-mod-bmf_2023.06.12~a9b3f1ac-r1_riscv64_riscv64.ipk
Size: 13965
SHA256sum: d3a87fdbe4f6853689196db869b5635438893c5a7f876b1a4c66dfa377a98be7
Description:  Basic multicast forwarding plugin

Package: olsrd-mod-dot-draw
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: riscv64_riscv64
Installed-Size: 20480
Filename: olsrd-mod-dot-draw_2023.06.12~a9b3f1ac-r1_riscv64_riscv64.ipk
Size: 4869
SHA256sum: 097f6205508d40e264326b9c0a9a011dc28399ca6b4dacd8e6d1136d2c8a8c77
Description:  Dot topology information plugin

Package: olsrd-mod-dyn-gw-plain
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: riscv64_riscv64
Installed-Size: 20480
Filename: olsrd-mod-dyn-gw-plain_2023.06.12~a9b3f1ac-r1_riscv64_riscv64.ipk
Size: 3374
SHA256sum: 0a79d2b3585a01a7447ca9fe5af462dea367e97ab6d880bae4bf019d1b3ecb62
Description:  Dynamic internet gateway plain plugin

Package: olsrd-mod-dyn-gw
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: riscv64_riscv64
Installed-Size: 20480
Filename: olsrd-mod-dyn-gw_2023.06.12~a9b3f1ac-r1_riscv64_riscv64.ipk
Size: 5240
SHA256sum: bb950ca5c02e248246fca8d76464361c195a2c32e88cde23837893255cc2b932
Description:  Dynamic internet gateway plugin

Package: olsrd-mod-filtergw
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: riscv64_riscv64
Installed-Size: 20480
Filename: olsrd-mod-filtergw_2023.06.12~a9b3f1ac-r1_riscv64_riscv64.ipk
Size: 3551
SHA256sum: fc88240a490669de28b545c0ee3fee103fce7f2b8e1d426f689fbb0d06421065
Description:  Filter Gateway plugin

Package: olsrd-mod-httpinfo
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: riscv64_riscv64
Installed-Size: 81920
Filename: olsrd-mod-httpinfo_2023.06.12~a9b3f1ac-r1_riscv64_riscv64.ipk
Size: 32825
SHA256sum: b242393a2164fd08ce5b3d02a6807ebf84bc94da0c6a3ca13def3a45951a404c
Description:  Small informative web server plugin

Package: olsrd-mod-jsoninfo
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: riscv64_riscv64
Installed-Size: 61440
Filename: olsrd-mod-jsoninfo_2023.06.12~a9b3f1ac-r1_riscv64_riscv64.ipk
Size: 24273
SHA256sum: 6006be84d443b90da675312155c80374e3be129b4777d4e9a6b2ee7d6e468201
Description:  Small informative plugin with JSON output

Package: olsrd-mod-mdns
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: riscv64_riscv64
Installed-Size: 30720
Filename: olsrd-mod-mdns_2023.06.12~a9b3f1ac-r1_riscv64_riscv64.ipk
Size: 10702
SHA256sum: 8467c2a7a1a8e3b6a6e23122d8f2f673ee131ee0f9412808551f364e827123dd
Description:  MDNS/Zeroconf/Bonjour packet distribution

Package: olsrd-mod-nameservice
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: riscv64_riscv64
Installed-Size: 40960
Filename: olsrd-mod-nameservice_2023.06.12~a9b3f1ac-r1_riscv64_riscv64.ipk
Size: 12725
SHA256sum: d2bc75baa49ff43f910c91369bdb1bc187b0cf57b7618161b3b8aa2dbf7fd3a0
Description:  Lightweight hostname resolver plugin

Package: olsrd-mod-netjson
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: riscv64_riscv64
Installed-Size: 40960
Filename: olsrd-mod-netjson_2023.06.12~a9b3f1ac-r1_riscv64_riscv64.ipk
Size: 14472
SHA256sum: f32922d27831e4a694a60cc935359bf0d8112290fd05ba63d303ac91a669c8e8
Description:  netjson plugin with JSON output

Package: olsrd-mod-p2pd
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: riscv64_riscv64
Installed-Size: 30720
Filename: olsrd-mod-p2pd_2023.06.12~a9b3f1ac-r1_riscv64_riscv64.ipk
Size: 10310
SHA256sum: 24d8a76c627d9c41c6a3e4460a815199532aaa313141ffea44bc8d49741c44f4
Description:  Peer to Peer Discovery plugin

Package: olsrd-mod-pgraph
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: riscv64_riscv64
Installed-Size: 20480
Filename: olsrd-mod-pgraph_2023.06.12~a9b3f1ac-r1_riscv64_riscv64.ipk
Size: 3894
SHA256sum: 827344127c1c85750494d5b91bc5fa486391e8a6a961a0dd719ed4b4e71397f9
Description:  output network topology for pgraph

Package: olsrd-mod-pud
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd, libgps30
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: riscv64_riscv64
Installed-Size: 174080
Filename: olsrd-mod-pud_2023.06.12~a9b3f1ac-r1_riscv64_riscv64.ipk
Size: 63332
SHA256sum: 37e3548dcd4c197c7e4197672dd160d4667f135acf9e02f02fe517ef2a2a5e9e
Description:  Position Update Distribution plugin

Package: olsrd-mod-quagga
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: riscv64_riscv64
Installed-Size: 20480
Filename: olsrd-mod-quagga_2023.06.12~a9b3f1ac-r1_riscv64_riscv64.ipk
Size: 7654
SHA256sum: 681125577506020ee50e2a4de35a0b8315a1bcd37265ba5869f9cf3ade5cf4d7
Description:  Quagga plugin

Package: olsrd-mod-secure
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: riscv64_riscv64
Installed-Size: 30720
Filename: olsrd-mod-secure_2023.06.12~a9b3f1ac-r1_riscv64_riscv64.ipk
Size: 12695
SHA256sum: 252b8fee63d3f1a9d64b559067657e9202dbfe57686113c11481664f8fd7b023
Description:  Message signing plugin to secure routing domain

Package: olsrd-mod-sgwdynspeed
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: riscv64_riscv64
Installed-Size: 20480
Filename: olsrd-mod-sgwdynspeed_2023.06.12~a9b3f1ac-r1_riscv64_riscv64.ipk
Size: 5372
SHA256sum: aa86bba54b173beaa50350589690382d85d9d1b79302bbfe3b74e44f9a8fa43d
Description:  Smart Gateway dynamic speed plugin

Package: olsrd-mod-txtinfo
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: riscv64_riscv64
Installed-Size: 40960
Filename: olsrd-mod-txtinfo_2023.06.12~a9b3f1ac-r1_riscv64_riscv64.ipk
Size: 16052
SHA256sum: db747af5cce8aa9fd51c364d7b28ecee0ea18f9432228e475a8f253a7ec4d3eb
Description:  Small informative web server plugin

Package: olsrd-mod-watchdog
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: riscv64_riscv64
Installed-Size: 20480
Filename: olsrd-mod-watchdog_2023.06.12~a9b3f1ac-r1_riscv64_riscv64.ipk
Size: 2579
SHA256sum: 45b5ba29d2ade717ab5d914b2a37264bb42d6d6b674f31e202138ebceff70037
Description:  Watchdog plugin

Package: olsrd-utils
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: riscv64_riscv64
Installed-Size: 10240
Filename: olsrd-utils_2023.06.12~a9b3f1ac-r1_riscv64_riscv64.ipk
Size: 1952
SHA256sum: 6b26565cb5d36ef962ec384cb34c777eb3e93645f1bd5c63ff50d93f5b858d4e
Description:  Utils for OLSRD

Package: olsrd
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, libpthread, libubus20231128, iptables, ip6tables
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: riscv64_riscv64
Installed-Size: 307200
Filename: olsrd_2023.06.12~a9b3f1ac-r1_riscv64_riscv64.ipk
Size: 144430
SHA256sum: 055139021a7a4dec2e82cc20942209a6e91a6817746a386c7e372d5444cb9248
Description:  OLSR (Optimized Link State Routing) daemon

Package: oonf-dlep-proxy
Version: 2022.08.25~fb15d54d
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: riscv64_riscv64
Installed-Size: 389120
Filename: oonf-dlep-proxy_2022.08.25~fb15d54d_riscv64_riscv64.ipk
Size: 180768
SHA256sum: e3a68253dce3d558c65f2badc2044e7ba5c1fde301fa010c6e466b5e8b9593f2
Description:  Build DLEP Radio+Router Agent

Package: oonf-dlep-radio
Version: 2022.08.25~fb15d54d
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: riscv64_riscv64
Installed-Size: 378880
Filename: oonf-dlep-radio_2022.08.25~fb15d54d_riscv64_riscv64.ipk
Size: 176450
SHA256sum: 9eea3fa6c9b2e5de183879178edb17dab98523c95c4ecb5de8c1db2be54bdfd7
Description:  Build DLEP Radio Agent

Package: oonf-init-scripts
Version: 0.9.1-r3
Depends: libc
Section: net
URL: http://www.olsr.org/
Architecture: riscv64_riscv64
Installed-Size: 10240
Filename: oonf-init-scripts_0.9.1-r3_riscv64_riscv64.ipk
Size: 2296
SHA256sum: 1fb36a0d3ea756ce88b48fa832889a0f3b330b1f8ce80bb85c2004fa9f1abc41
Description:  Common OONF startup scripts

Package: oonf-olsrd2
Version: 2022.08.25~1cec9b21
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: riscv64_riscv64
Installed-Size: 552960
Filename: oonf-olsrd2_2022.08.25~1cec9b21_riscv64_riscv64.ipk
Size: 258579
SHA256sum: 227fd57a0d976b79ab92a85c077a59f9e51d259a123d6232571794b52369354b
Description:  Build Olsrd V2 Routing Agent

Package: opennds
Version: 10.2.0-r1
Depends: libc, libmicrohttpd-no-ssl
Conflicts: nodogsplash
License: GPL-2.0-or-later
Section: net
URL: https://github.com/opennds/opennds
Architecture: riscv64_riscv64
Installed-Size: 552960
Filename: opennds_10.2.0-r1_riscv64_riscv64.ipk
Size: 162407
SHA256sum: ab07bd8020e37d3321b4f321c761bb64f018111e0682b261183e6d517b269c37
Description:  openNDS (open Network Demarcation Service) is a high performance, small footprint, Captive Portal.
 It provides a border control gateway between a public local area network and the Internet.
 It supports all scenarios ranging from small stand alone venues through to large mesh networks with multiple portal entry points.
 Both the client driven Captive Portal Detection method (CPD) and gateway driven Captive Portal Identification method (CPI - RFC 8910 and RFC 8908) are supported.
 This version uses nftables.

Package: pimbd
Version: 2018.06.19~dbf4e591-r4
Depends: libc, netifd
License: Apache-2.0
Section: net
URL: https://github.com/Oryon/pimbd.git
Architecture: riscv64_riscv64
Installed-Size: 204800
Filename: pimbd_2018.06.19~dbf4e591-r4_riscv64_riscv64.ipk
Size: 88809
SHA256sum: a9fa2f84bd67ffb5b6b4e91a13f5784515e3abf87902206a70738791555a1ca2
Description:  This package provides a daemon which implements the Protocol Independent
 Multicast BIDIR routing protocol. Note that a routing protocol must be
 installed and running in order for PIM to function.

Package: prince
Version: 0.4-r3
Depends: libc, libjson-c5, libpthread
License: MIT
Section: net
URL: https://github.com/AdvancedNetworkingSystems/prince
Architecture: riscv64_riscv64
Installed-Size: 92160
Filename: prince_0.4-r3_riscv64_riscv64.ipk
Size: 31778
SHA256sum: dc76895e0036681ae83e48286b30c6e41160a96e37919211cfd59645b1871435
Description:  Prince is an open source implementation of the PopRouting Algorithm.
 It has been developed as a Google Summer of Code Project in collaboration with Freifunk and the University of Trento.
 
 Prince fetches topology data from a Link State routing daemon (OONF, OLSR, OSPF, etc),
 calculates the betweenness centrality using the topology and then computes the
 the timers' optimal values using these data. At the end of the computation the timers are pushed back to the routing daemon.
 Since v0.4 it supports both OONF and OLSRd.

Package: vis
Version: 2013.04.07~7710cce4-r9
Depends: libc, libpthread
License: GPL-2.0-only
Section: net
URL: https://www.open-mesh.org/
Architecture: riscv64_riscv64
Installed-Size: 30720
Filename: vis_2013.04.07~7710cce4-r9_riscv64_riscv64.ipk
Size: 12457
SHA256sum: 9e79577e3831c94d90564a28a74e8c16b402f0e726618ca2fc58fb3d4744d4b0
Description:  visualization server for B.A.T.M.A.N. layer 3

Package: zonestitcher
Version: 2020.05.22~0dfef1eb-r3
Depends: libc, libubox20240329
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/ohybridproxy
Architecture: riscv64_riscv64
Installed-Size: 30720
Filename: zonestitcher_2020.05.22~0dfef1eb-r3_riscv64_riscv64.ipk
Size: 11119
SHA256sum: f6b9c3738dbbadd0c8dea7eaf667df8a5c6fe5cc66cff5006e701527ec7f43e1
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.